![](/images/new-backgrounds/1116838/11683873x1.webp)
SETUP menu
SETUP menu (continued)
Item
Description
| This item allows you to adjust the shape of the projected image in | |
| each of the corners. | |
| (1) Choose the corner to adjust using | |
| the ▲/▼/◄/► buttons and press the | |
| ENTER or INPUT button. | |
| (2) Use the ▲/▼/◄/► buttons to adjust | |
| the position of the corner. | |
| Press the ENTER or INPUT button to | |
| exit the adjustment of the corner. | |
PERFECT FIT | (3) To adjust another corner, follow the | |
same procedure from (1) above. | ||
| ||
| To reset the adjustment of all the corners, select RESET using | |
| the ▲/▼ buttons and press the ENTER or INPUT button. | |
| • While this item is adjusted, keystone adjustment feature (36) is | |
| unavailable. To correct the keystone distortion, reset the adjustment | |
| of all the corners. | |
| • The adjustable range of this correction will vary among inputs. For | |
| some input, this function may not work well. | |
| • This function will be unavailable when the Transition Detector is | |
| on (53). |
Using the ▲/▼ buttons turns off/on the whisper mode.
WHISPER | BRIGHT ó NORMAL | |
• When NORMAL is selected, acoustic noise and screen brightness | ||
| ||
| are reduced. | |
| Using the ▲/▼ buttons switches the mode for mirror status. | |
MIRROR | NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT |
If the Transition Detector is TURN ON and MIRROR status is changed, Transition Detector Alarm (53) will be displayed when projector is restarted after the power switch is turned off.
(continued on next page)
37