OPTION menu
OPTION menu
From the OPTION menu, items shown in the table below can be performed.
Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item, except for the items LAMP TIME and FILTER TIME. Then perform it according to the following table.
Item
Description
Using the ▲/▼ buttons turns on/off the automatic signal search function.
TURN ON TURN OFF
| When the TURN ON is selected, detecting no signal automatically |
| cycles through input ports in the following order. The search is |
AUTO SEARCH | started from the current port. Then when an input is found, the |
| projector will stop searching and display the image. |
| COMPUTER IN1 COMPUTER IN2 |
| VIDEO |
|
|
| Using the ▲/▼ buttons turns on/off the AUTO ON function. |
| TURN ON TURN OFF |
| When set to the TURN ON, the lamp in projector will be |
| automatically turned on without the usual procedure (16), only |
AUTO ON | when the projector is supplied with the power after the power was |
cut while the lamp was on. |
•This function does not work as long as the power has been supplied to the projector while the lamp is off.
•After turning the lamp on by the AUTO ON function, if neither input nor operation is detected for about 30 minutes, the projector is turned off, even though the AUTO OFF function (45) is disabled.
(continued on next page)
44
