![](/images/new-backgrounds/1062146/6214619x1.webp)
outside of cover and the cover is in proper posit&on on the gasket before latching.
With the cleaner upright and the handle in the storage position, turn on the motor briefly before lowering handle into cleaning position. This insures that the
THE SECONDARY FILTER The secondary filter protects the motor from dirt. Before installing a new bag, check the filter. Dirt spilled in the bag housing will accumulate on the filter and may restrict motor performance. To clean filter, remove wire holder and lift out filter. After new bag is installed, close bag housing and set suction dial for cleaning tools. Plug cleaner into electrical outlet, turn on, and tap filter against opening below the suction dial. Disconnect cleaner from electrical outlet, replace filter in bag housing, and secure with wire holder.
THE NOZZLE HOSE The nozzle hose on the cleaner carries the dirt from the nozzle to the
Fig. 1. Turn cleaner over, remove bottom plate (see Page 10) and lift hose connector from cleaner. Fig. 2. Clean hose and reinsert it in the cleaner.
FIG. 1
FIG. 2