Hoover U6049 Howtouse, To move forward, To move backward, Set the suction, Three position handle

Howtouse

This deluxe cleaner provides you with an automatic ‘Power Drive’ feature. It propels the cleaner forward and backward at a variable rate of speed controlled

entirely by (you) the operator. !

To move forward

Push the handle grip forward. Notice that the clean- er moves in a forward direction with little effort. You control the speed at which the cleaner moves.

To move backward

Gently pull the handle grip and guide the cleaner toward you. The cleaner moves both forward and backward with the same ease when using the auto- matic ‘Power Drive’ feature.

FIG. 1

NOTE: For best results guide the cleaner gently at

first until you have adjusted to the ease of operating the cleaner. The ‘Power Drive’ feature is in operation only when the motor is turned on. To move the cleaner without operating the motor use the trans- port button (disengage drive) according to the instructions on page 5.

Set the suction

Set the dial on the back of the cleaner to the Carpet Suction area. It is suggested that you set the indicator at MAX setting for all carpeting. If the cleaner is dif- ficult to push over carpeting with suction at MAX, move the indicator toward the MIN setting.

Note: Be certain dial indicator points to desired suction-not to the neutral area between carpet and tool suction.

Three position handle

Storage, operating and low (for reaching under low furniture). The handle can be lowered by stepping on the pedal at the left rear of cleaner.

The handle should always be in storage position when cleaning tools are used.

4