3-6

C

How to reattach filter door

The filter door is designed with a “break- away“ feature which allows it to snap free if it is pushed open too far.

To reattach, align hinges (C) of cover with slots on sides of filter area.

Press door back into place.

Check brush roll chan- nels

Because your WindTunnel™ cleaner picks up so well, we strongly recom- mend you check for debris accumulation in the channels next to the brush roll when you check the filters. Removing this debris will help maintain you clean- er’s excellent pick up and suction. Remove debris as follows:

Disconnect cleaner from electrical outlet.

Check for debris accumulation by removing bottom plate (Fig. 3-9) and looking in the channels next to the brush roll (Fig. 3-18).

Remove any accumulation.

Reposition bottom plate (Fig. 3-13).

Headlight replace- ment

What to buy

This cleaner uses a 12 volt, wedge base type 912 bulb, Hoover part No. 27313101.

3-7

Removing lens

Disconnect cleaner from electrical outlet.

Using a Phillips screwdriver, remove the two screws as shown and lift off lens.

3-8

Installing bulb and replacing lens

Pull old bulb straight out of socket. Push new bulb straight into socket until locked in place.

Excessive force is not required.

Reposition lens and secure with the two screws.

Belt replacement

The belts are located under the bottom plate of the cleaner and should be checked from time to time to be sure they are in good condition.

The flat (wide) belt is described below; the other is described under “Brush roll replacement”.

When to replace

Disconnect cleaner from electrical outlet.

Warning - Brush roll can start suddenly. Unplug cleaner when it is turned over.

To check the flat belt, remove bottom plate as shown in Fig. 3-9. Replace belt if it is stretched, cut or broken.

What to buy

To assure effective operation, use only genuine HOOVER belts with your clean- er. When purchasing a new belt, ask for: Flat belt - HOOVER part No. 38528035.

3-9

A

Replacing flat belt

Removing bottom plate

Disconnect cleaner from electrical outlet.

Warning - Brush roll can start suddenly. Unplug cleaner when it is turned over.

Place handle in low position and turn cleaner over so bottom side is up.

Remove the 4 screws as shown with a Phillips screw driver.

Lift off bottom plate (A).

3-10

B

C

Removing belt

Flat belt (B) operates the self-propel fea- ture and indirectly drives the brush roll.

Remove used belt (B) from large pulley

(C) and discard.

10

3-11

D

Positioning back of belt

With lettering on outside of belt, slide new belt over motor shaft (D).

3-12

C

Positioning front of belt

Place other end of belt over large pulley

(C)while rolling the pulley in direction shown.

Page 9 Page 11
Page 10
Image 10
Hoover Wind Tunnel vacuum cleaner manual Headlight replace- ment, Belt replacement, How to reattach filter door
Page 9 Page 11

Wind Tunnel vacuum cleaner specifications

The Hoover Wind Tunnel vacuum cleaner stands out as a reliable and efficient cleaning solution for households seeking a powerful and convenient way to maintain their living spaces. Known for its innovative design and advanced technology, this vacuum cleaner is engineered to deliver maximum dirt removal, making it a favorite among users.

One of the key features of the Hoover Wind Tunnel vacuum is its Wind Tunnel technology. This proprietary system consists of multiple air tunnels that create a powerful suction, effectively lifting and trapping dirt and debris from various surfaces. The vacuum's ability to maintain consistent airflow means that it can capture even the most stubborn dirt, regardless of whether it is on carpets or hard floors.

The Hoover Wind Tunnel vacuum cleaner is equipped with a HEPA filter, which is essential for trapping allergens and fine particles. This ensures that the air released back into your home is cleaner, making it a great choice for allergy sufferers. Many models also come with a washable filter, allowing for easy maintenance and cost savings over time.

Another notable characteristic is the vacuum's multi-floor capability. Users can easily switch between carpet and hard floor modes, providing versatility for different cleaning needs. Additionally, the vacuum's adjustable height settings allow for optimal performance on various carpet types, ensuring thorough cleaning without causing damage.

The Hoover Wind Tunnel also features a range of attachment tools that enhance its cleaning capabilities. These typically include tools such as a crevice tool for tight spaces, an upholstery brush for furniture, and a dusting tool for delicate items. This versatility makes it easier to tackle tough-to-reach areas and ensures comprehensive cleaning throughout the home.

In terms of design, the Hoover Wind Tunnel vacuum cleaner is built for ease of use. Its lightweight construction and ergonomic handle promote effortless maneuverability, while an array of onboard storage options for attachments keeps everything handy. The vacuum also offers a generous cord length, allowing users to clean larger areas without the hassle of constantly switching outlets.

In conclusion, the Hoover Wind Tunnel vacuum cleaner combines powerful suction with innovative technology, making it an ideal choice for effectively maintaining cleanliness in the home. Its advanced features, versatility, and user-friendly design reflect a commitment to quality that meets the demands of modern households. Whether tackling carpets, hard floors, or detailed cleaning tasks, this vacuum cleaner proves to be a reliable partner in home maintenance.
Top Page Image Contents