1 |
E |
B |
J |
D |
STEP 1:
ATTACH REAR FOOT TUBE. Note: Make sure not to tighten bolts until all assembly steps have been completely assembled and aligned.
2
STEP 2:
ATTACH SEAT AND SEAT POST. Note: Slide seat post into position and lock with the pop pin.
Note: Bolts, nuts and washers are
3 | L |
| R |
STEP 3:
ATTACH LEFT & RIGHT PEDALS. Note: Both pedals are labeled L for left and R for right. To tighten turn the left pedal COUNTER CLOCKWISE and the right pedal
CLOCKWISE.
4 |
C |
E |
STEP 4:
ATTACH CONSOLE MAST. Note: Make sure to loosen the water bottle screws in order to fit the console cable through the mast. DO NOT PINCH WIRES!
5
A |
E |
STEP 5:
ATTACH HANDLEBAR.
Note: Feed wires through the front console mast hole before tighten- ing bolts. DO NOT PINCH WIRES!
6
STEP 6:
ATTACH CONSOLE AND CON- NECT ALL WIRES.
Note: DO NOT PINCH WIRES! Bolts are
7 |
STEP 7:
ATTACH TENSION KNOB. (2.1B only) Note: Bolt is
The resistance indicator is located on the front of the tension knob.
9