Hoshizaki FD-1001MAH(-C), FD-1001MLH(-C), FD-1001MRH(-C), FD-1001MWH(-C) N. Removal and Replacement of Control Board

95
N. Removal and Replacement of Control Board
1) Turn off the power supply.
) Remove the front panel and the control box cover.
3) Disconnect the control board connectors from the control board.
4) Remove the control board.
5) Adjust the dip switches on the new control board to the factory default settings. See "II.
C.4.a) Default Dip Switch Settings."
6) Install the new control board taking care not to damage it.
7) Connect the control board connectors to the new control board.
8) Replace the control box cover and front panel in their correct positions.
9) Turn on the power supply.