1.Silencing High Temperature, Low Temperature, and Door Alarms To silence the alarm, press the
For Ld (door) alarm, the alarm clears once the door is closed or the
2.Clearing High Temperature and Low Temperature Alarms
For AH and AL alarms, the red alarm icon and AH or AL continue to alternate with cabinet temperature after alarm is silenced. When the temperature returns to setpoint, follow the steps below to clear the alarm.
1)Press and hold the
2)Press the
3)Press the "P" button.
4)Press the
5)Press the "P" button. The display flashes
Note: If the cabinet temperature is out of acceptable range, the procedures above only change the alarm icon from flashing to steady for 15 minutes.
F.Control Panel Lockout
The control panel can be locked to help prevent the unit from being turned off or the setpoint from being changed inadvertently.
To lock the control panel, press and hold the
To unlock the control panel, press and hold the
G. Door Lock
The unit has a door lock located under the control panel to help prevent unauthorized access to the cabinet interior. Two keys are provided in the accessory bag.
H. Defrost
1. Automatic Defrost
This unit uses an
2. Manual Defrost
To initiate a manual defrost, press and hold the "+" button until the defrost icon appears on the display. Defrost lasts for 30 minutes. During defrost, the defrost icon appears on the display. The compressor is
15