I. Cooling Performance
Be sure the unit is properly installed and located for optimum cooling performance. If cooling performance is not at its optimum level, check the following items:
•Door opened too often.
•Door left open. Close.
•Too tightly packed or cabinet air inlet/outlet blocked. Allow some space between items to ensure good air flow.
•Ambient temperature too high. Avoid installation near high heat producing equipment or exposure to direct sunlight.
•Temperature setpoint too high. Readjust it to a lower temperature.
•Unit in defrost process. The cabinet temperature may rise temporarily during the defrost cycle, but this will not affect the items inside.
J.Cabinet Condensation
In the event condensation develops on the cabinet exterior, check the following items:
•Door left open, close.
•Ambient humidity too high. In high humidity areas it may be necessary to wipe off the cabinet frame occasionally.
K.Power Outage
In the event of a power outage, the unit will come back on if it was on at the time of the power outage. The unit will stay off if it was off at the time of the power outage.
16
