2. Built-In Installation Site
NOTICE
•Do not let the weight of the counter rest on the unit. There must be at least 1" (3 cm) clearance between the top of the unit and the bottom of the counter.
•Do not install the unit in a corner where the door will interfere with other equipment or where the unit cannot be pulled out for service.
|
|
| Installation Space |
|
|
|
|
|
|
| Model | Height | Width | Depth |
|
|
|
|
|
| HR24A | 34" (864 mm) minimum | 24" (610 mm) minimum | |
|
|
|
|
|
Between Two Cabinets | Between a Cabinet and | |||
|
|
| the End of a Counter |
Min. 34"
(864 mm)
| Min. 34" |
| (864 mm) |
Min. 24" | Min. 24" |
(610 mm) | (610 mm) |
There must be at least 1" (3 cm) clearance between the top of the unit and the bottom of the counter.
Support: Do not let the weight of the counter rest on the unit.
Between a Cabinet and a Wall or Tall Cabinet
Secure: Do not let the weight of the counter rest on the unit.
In a Corner
.32" Min mm) (813
Oven
Top Trim
Refrigerator
Toe Kick
There must be at least 1" (3 cm) clearance between the top of the unit and the bottom of the counter.
7