Hoshizaki IM-500SAA generic IM Training manual

2

All IM models have similar sequence of operation. This manual is designed as a

generic IM Training manual.

The Hoshizaki IM series ice machine uses a horizontal evaporator design which forms a square cube shape with a small dimple. 20mm

Astandard 120-volt power cord (field supplied) provides the electrical connection. The unit is designed to operate on a separate 20-amp circuit.

The water supply connection is 1/2” FPT fitting and is located at the top right side of the unit. A minimum 1/4” water line is required for proper operation.

The drain connection is 3/4” FPT fitting located on the right rear of the unit. A standard 3/4” MPT fitting can be used to connect this drain.