Hoshizaki KMD-450MWH instruction manual KMD-450MAH, Icemaker

1. Icemaker

•Icemaker water supply inlet is 1/2" female pipe thread (FPT). A minimum of 3/8" OD copper tubing is recommended for the icemaker water supply line.

•An icemaker water supply line shut-off valve and drain valve should be installed.

•Icemaker drain outlet is 3/4" FPT. A minimum of 3/4" OD hard pipe is recommended for the icemaker drain line.

Icemaker	Icemaker
Water Supply
Inlet	Icemaker Water Supply Line
1/2" FPT	Shut-Off Valve
	Icemaker Water Supply Line
	Drain Valve

Icemaker

Drain Outlet

3/4" FPT

Bin Drain Outlet 3/4" FPT

Bin	Separate piping to approved drain.
	Leave a two-inch (5 cm) vertical air
	gap between the end of each pipe
	and the drain.
	Two-inch
	(5 cm) air
	gap

Floor Drain

Fig. 7 KMD-450MAH

14