Hoshizaki KML-450MAH, KML-450MWH instruction manual aCLEANING PROCEDURE

III.CLEANING AND MAINTENANCE INSTRUCTIONS 1. CLEANING INSTRUCTIONS

WARNING

1.HOSHIZAKI recommends cleaning this unit at least once a year. More frequent cleaning, however, may be required in some existing water conditions.

2.To prevent injury to individuals and damage to the icemaker, do not use ammonia type cleaners.

3.Always wear liquid-proof gloves for safe handling of the cleaning and sanitizing solution. This will prevent irritation in case the solution contacts with skin.

[a]CLEANING PROCEDURE

1)Dilute approximately 10.5 fl. oz. of recommended cleaner Hoshizaki “Scale Away” or “LIME-A-WAY,” (Economics Laboratory, Inc.) with 2 gal. of water.

2)Remove all ice from the Evaporator and the Storage Bin.

Note: To remove cubes on the Evaporator, turn off the power supply and turn it on after 3 minutes. The defrost cycle starts and the cubes will be removed from the Evaporator.

3)Turn off the power supply.

4)Remove the Front Panel.

5)Place the Control Switch in the “SERVICE” position. Then place the Service Switch in the “DRAIN” position.

6)Replace the Front Panel and turn on the power supply for 2 minutes.

7)Turn off the power supply.

8)Remove the Front Panel and then remove the Insulation Panel by lifting up the panel slightly and pulling it toward you.

9)Pour the cleaning solution into the Water Tank.

18