7)After 30 minutes, move the Control Switch to the “OFF” position.
8)Same as step 4.
9)Move the Control Switch to the “ICE” position to fill the Water Tank with water.
10)After 3 minutes, move the Control Switch to the “SERVICE” position and the Service Switch to the “WASH” position.
11)After 5 minutes, move the Control Switch to the “OFF” position.
12)Same as step 4.
13) Repeat steps 9 through 12 three more times to rinse thoroughly.
14) Disconnect the Overflow Pipe. Next, remove the Water Tank by removing the two Thumbscrews and pulling the tank towards you slightly and pushing it down. Be careful to avoid breakage when handling the parts. See Fig. 7.
Thumbscrew
Bracket (L) | Evaporator | Cube Guide | Water Tank | Bracket (R) |
Fig. 7
15
