Condenser unit - You must clean the fluff from the condenser every month!
Step 1
Open the Condenser Cover
-hold the handle and pull towards you.
Step 2
GB
Remove the condenser by rotating the 3 clips then pulling the condenser towards you. (There may be some water in the tubes this is normal).
Step 3
Flush the condenser, from the rear with water, to remove any fluff deposits.
Step 4
Refit the condenser unit - ensure that the unit is pushed in fully, all 3 clips are resecured and the positioning arrows on the front of the condenser are pointing upwards.
Failure to clean the condenser could cause premature failure of your dryer!
3
