Drainage

Connection

65 - 100 cm

Connect the drain hose, without kinking it, to a draining duct or a stand pipe situated between 65 and 100 cm from the floor;

•the supply voltage is included within the values i

ndicated on the Technical details table

GB

 

(on the page 5);

 

•the socket is compatible with the washing machine's plug. If this is not the case, replace the socket or the plug.

Your appliance is now supplied with a 13 amp fused plug it can be plugged into a 13 amp socket for immediate use. Before using the appliance please read the instructions below.

The drain hose may be connected to an under- sink trap. Before connecting the drain hose from the machine ensure that any blanks or removable ends have been taken off the spigot.

If it is placed over the edge of a basin or sink be sure the free end of the hose should not be underwater.

￿We advise against the use of hose extensions; in case of absolute need, the extension must have the same diameter as the original hose and must not exceed 150 cm in length.

Ensure that if the drain hose is pushed into a standpipe, that the end does not go down more than 15cms (6 inches). If the hose is pushed down too far, this may cause the machine to self - syphon ie. continuously empty as it is filling.

Electric connection

Before plugging the appliance into the mains socket, make sure that:

•the socket is earthed and in compliance with the applicable law;

•the socket is able to sustain the appliance's maximum power load indicated in the Technical details table (on the page 5);

WARNING - THIS APPLIANCE MUST BE EARTHED. THE FOLLOWING OPERATIONS SHOULD BE CARRIED OUT BY A QUALIFIED ELECTRICIAN.

Replacing the fuse:

When replacing a faulty fuse, a 13 amp ASTA approved fuse to BS 1362 should always be used, and the fuse cover re-fitted. If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug. Replacements can be obtained directly from your nearest Service Depot.

Removing the plug:

If your appliance has a non-rewireable moulded plug and you should wish to re-route the mains cable through partitions, units etc., please ensure that either:

the plug is replaced by a fused 13 ampere re- wearable plug bearing the BSI mark of approval. or:

the mains cable is wired directly into a 13 amp cable outlet, controlled by a switch, (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug:

Ensure that before disposing of the plug itself, you make the pins unusable so that it cannot be accidentally inserted into a socket.

Instructions for connecting cable to an alternative plug:

Important: the wires in the mains lead are coloured in accordance with the following code:

Green & Yellow Earth

B l u e

Neutral

B r o w n

L i v e

3

Page 4 Page 6
Page 5
Image 5
Hotpoint AQXXF 149 PM manual 65 100 cm
Page 4 Page 6

AQXXF 149 PM specifications

The Hotpoint AQXXF 149 PM is a commendable washing machine that perfectly blends functionality and innovation, making it a popular choice for households seeking efficiency and performance. This model is part of Hotpoint's dedicated line of appliances known for their reliability and user-friendly features.

One of the standout features of the AQXXF 149 PM is its impressive capacity of 9 kg, which allows users to wash larger loads in a single cycle. This is particularly beneficial for families or individuals with a significant amount of laundry, ensuring that laundry days are finished quickly. Coupled with a spin speed of 1400 RPM, the washing machine successfully extracts excess water, reducing drying time and enhancing overall efficiency.

In terms of energy efficiency, the AQXXF 149 PM boasts an energy rating of A+++, underscoring its eco-friendly design. This not only translates to lower utility bills but also represents a commitment to sustainability, an increasingly important factor for modern consumers.

Hotpoint has equipped the AQXXF 149 PM with smart technologies that further improve the user experience. The Anti-Stain technology is one such feature, designed to tackle a variety of stains effectively without the need for pre-treatment. It automatically adjusts water temperature and motion patterns to ensure that even the toughest stains are removed, providing peace of mind for busy parents or individuals.

Another notable technology is the ActiveCare function, which ensures that the garments receive a gentle yet thorough wash. This feature minimizes fabric wear, extending the life of clothing while maintaining their color and texture. The Quick Wash option is yet another advantage, allowing users to complete a cycle in as little as 30 minutes, perfect for those last-minute laundry needs.

The machine is equipped with intuitive controls and a digital display that simplifies the selection of wash programs. It features several preset wash options catering to various fabric types, including delicate, wool, and synthetics, ensuring that every item is treated appropriately.

In addition, the AQXXF 149 PM has a delay start feature, which can be particularly convenient for users who want to take advantage of off-peak energy rates or those who prefer to run their laundry at night.

Overall, the Hotpoint AQXXF 149 PM stands out as a modern, efficient washing machine that offers an array of beneficial features aimed at simplifying laundry tasks while delivering excellent cleaning results. Its thoughtful design and advanced technologies make it a reliable companion for any household.
Top Page Image Contents