Installation Instructions

Ensure that the electricity supply is turned off before installing your appliance.

IMPORTANT

DO NOT LIFT OVEN BY THE

DOOR HANDLES.

This equipment is designed specifically for domestic purposes and Hotpoint Limited cannot accept responsibility if used for any other type of application.

All electrical installations must be carried out by a NICEIC registered installer.

WARNING: THIS APPLIANCE

MUST BE EARTHED.

1.General

The appliance is designed for mounting at a safe level into an open housing which must be secured to the backing wall.

2.Oven Unit Housing Cabinets

a.The oven unit housing cabinet dimensions must comply with Fig. 4. (See page 7.)

b.An air gap of 50 mm minimum must be provided at the rear of any top or bottom cupboards or shelves. (See Fig. 1 page 6.)

c.Ventilation must be unobstructed, ie. from adjacent cabinetry. This can be done by either raising the base of the cabinets using the adjusting feet (or spacers) or alternatively by providing a slot in the cabinet plinth to the dimensions shown overleaf.

d.The air gap at the rear allows the warmed air to pass out of the inner cabinet space, but where it is intended to fit

cupboards above the oven unit to ceiling height it is essential that the warmed air is exhausted through the front of the cabinet Fig. 1. (See page 6.)

e.If an oven unit is installed adjacent to a tall cabinet, steam escaping from the oven when the door is opened could condense on, and perhaps stain, the adjacent surface. To prevent permanent staining, the adjacent surface should be made of a material that is heat resistant and easy to clean.

Adjacent tall cabinets should not be deeper than the oven housing cabinet.

IMPORTANT

It is essential that the lower cupboard is constructed in the manner illustrated see pages 6 and 7 ie. having side, back and roof panels so joined as to provide no apertures which could permit access to the oven unit when installed .

3.Final Installation

a.Using a spirit level, check that the housing cabinet is level from side to side and from front to back in its installed position.

b.Correct any unevenness by placing wooden packing under the bottom of the cabinet. Make sure that the cabinet rests firmly on the cabinet floor without rocking

c.Before the oven is fitted, the cabinet must be firmly secured to the backing wall for stability.

4

Page 4
Image 4
Hotpoint BD62 BD52 manual Installation Instructions, General, Oven Unit Housing Cabinets, Final Installation

BD62 BD52 specifications

The Hotpoint BD62 and BD52 are two popular models of built-in double ovens that cater to the needs of modern kitchens, combining functionality with stylish design. Known for their reliability and versatility, both ovens showcase a host of features that cater to both novice cooks and experienced chefs.

One of the standout features of the Hotpoint BD62 and BD52 is the impressive cooking capacity. With generous space in both ovens, these models allow users to cook multiple dishes simultaneously, making them ideal for family gatherings or dinner parties. The large interior space accommodates various cooking trays and racks, ensuring flexibility in meal preparation.

Both models are equipped with the innovative Multiflow technology, which helps in maintaining a consistent temperature throughout the oven. This technology circulates hot air evenly, resulting in perfectly cooked meals, whether baking pastries or roasting meats. Additionally, the fan-assisted cooking feature allows for quicker preheating and reduced cooking times, enhancing the overall cooking experience.

The Hotpoint BD62 and BD52 also feature the exclusive Double Oven cooking program. This functionality allows users to prepare different courses at varying temperatures, ensuring that each dish comes out perfectly cooked. This is particularly beneficial for multi-stage meals, where timing is crucial.

Cleaning up after cooking is made easier with the integrated Easy Clean technology. The special enamel coating on the interior surfaces allows for easy wiping, while the steam clean function softens any food residues, making it hassle-free to maintain cleanliness.

Moreover, both ovens come with several safety features to ensure peace of mind while cooking. The child lock function prevents accidental opening, while the cooling fan helps regulate the temperature on the exterior, minimizing the risk of burns.

The sleek stainless-steel finish of the Hotpoint BD62 and BD52 adds a contemporary touch to any kitchen decor. Their modern design, combined with practical functionality, makes them an excellent addition to both traditional and contemporary kitchens.

In conclusion, the Hotpoint BD62 and BD52 models embody a blend of performance, style, and technology. Their expansive cooking capacity, innovative features, and user-friendly design position them as top contenders in the built-in double oven market, appealing to everyone from casual cooks to culinary enthusiasts. Whether you’re baking, roasting, or grilling, these ovens deliver exceptional results that enhance your cooking experience.