Leds
The LEDS provide important information. This is what they can tell you:
Delay set:
If the Delay Start function has been enabled (see page. 11), once you have started the programme, the LED corresponding to the delay set will begin to flash:
Prewash 
2hr
Wash 
4hr
Rinse6hr
Spin9hr
As time passes, the remaining delay will be displayed, and the corresponding LED will flash:
Prewash 
2hr
Wash 
4hr
Rinse6hr
Spin9hr
Once the set delay is complete, the flashing LED will turn off and the programme set will start.
Cycle phase under way:
During the wash cycle, the LEDs gradually illumi- nate on to indicate the cycle phase under way:
Prewash
Wash
Rinse
Spin
Note: during draining, the LED corresponding to the Spin cycle phase will be turned on.
Function buttons
The FUNCTION BUTTONS also act like LEDS. When a function is selected, the corresponding button is illuminated.
If the function selected is incompatible with the programme set, the button will flash and the function will not be enabled.
If you set a function that is incompatible with another function you selected previously, only the last one selected will be enabled.
GB
Installation Description Programmes Detergents Precautions
DOOR LOCKED led:
If this LED is on, the appliance door is locked to prevent it from being opened accidentally; to avoid any damages, wait for the LED to flash before you open the appliance door.
The rapid flashing of the DOOR LOCKED Led together with the flashing of at least one other LED indicates there is an abnormality. Call for Technical Assistance (see page 15).
Care Troubleshooting Service
9
