Hotpoint BWM 129 manual Personalisations, Setting the temperature Variable Temperature, Functions

Personalisations

Setting the temperature (Variable Temperature )

Turn the VARIABLE TEMPERATURE knob to set the wash temperature (see Programme table on page 10). The temperature can be lowered, or even set to a cold wash (Cold).

Setting the spin speed (Variable Spin)

Turn the VARIABLE SPIN SPEED knob to set the spin speed for the programme selected. The maximum spin speeds for each programme are as follows:

Programmes	Maximum spin speed
Cotton	1200 rpm
Synthetics	800 rpm
Wool	600 rpm
Silks	no

The spin speed can be lowered, or the spin cycle can be excluded altogether by selecting “No Spin”.

The washing machine will automatically prevent you from selecting a spin speed higher than the maximum speed for each programme.

Functions

To enable a function:

1.press the button corresponding to the desired function, according to the table below;

2.the function is enabled when the corresponding button is illuminated.

Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the programme set.

Function	Effect	Comments	Enabled with
			programmes:
	Delays the	Press the button repeatedly until the LED corresponding to
		the desired delay is turned on.
	start of the	The fifth time the button is pressed, the function will be	All
	wash by up to 9	disabled.
Delay
	hours.	N.B.: Once you have pressed the Start/Reset button, the delay
Start		can only be decreased if you wish to modify it.
	Allows for an
	impeccable wash,		A, B, C, D,
	visibly whiter	This function is incompatible with the QUICK WASH function.
Super			E, F, G, H
	than a standard
Wash	Class A wash.
	Cuts the
	duration of the	This function is incompatible with the SUPER WASH function.	A, B, C, D,
	wash cycle by		E, F, G, H
Quick
	30%.
Wash
	This function	This function allows you to interrupt a programme keeping the
	reduces the
		washing soaking in water before the spin cycle (Anti-crease)
	amount of		F, G, H, L
		and the Rinse cycle phase LED will flash. It is a very useful
	creasing on		and Light
		function in particular because it can be used for silk and
	fabrics, making		Rinses
		synthetics.
	them easier to
Rinse Hold		To conclude the cycle, press the Rinse Hold button.
	iron.

GB

Installation Description Programmes Detergents Precautions

Care Troubleshooting Service

11