| 4. | Set the cooking duration using the | |
GB | |||
| buttons. |
| |
|
| ||
| 5. | Confirm by pressing the | button or automatic |
selection occurs after 10 seconds.
The timer begins counting down immediately. A buzzer sounds for approximately 1 minute and the cooking zone switches off when the set programme has finished. Repeat the above procedure for each hotplate you wish to programme.
Using multiple programmes and the display
If one or more hotplates are programmed, the display will show the data for the hotplate with the least time remaining, and the light corresponding to the position of the hotplate will flash. The lights corresponding to the other hotplates programmed will be switched on. To visualise the time remaining for the other programmed
hotplates, press the 
button repeatedly: the time
remaining for each hotplate will be shown sequentially in a clockwise order, starting from the front left hotplate.
Changing the programme
1.Press the 
button repeatedly until the duration you wish to change is shown.
2.Use the 
buttons to set the new duration.
3.Confirm by pressing the 
button.
To cancel a programme, follow the above instructions.
At step 2, press the - button: the duration decreases
progressively until it reaches 0 and switches off. The programme resets and the display exits programming mode.
Timer
The hob must be switched on.
The timer can be used to set a duration up to 99 minutes.
1.Press the 
programming button until the timer
indicator light is illuminated 
.
2.Set the desired duration using the
3. Confirm by pressing the 
button.
The timer begins counting down immediately. When the time has elapsed, a buzzer will sound (for one minute).
Control panel lock
When the hob is switched on, it is possible to lock the oven controls in order to avoid accidental changes being made to the settings (by children, during
cleaning, etc.). Press the 
button to lock the
control panel: the indicator light above the button will switch on.
To use any of the controls (e.g. to stop cooking), you
must switch off this function. Press the 
button for
a few moments, the indicator light will switch off and the lock function will be removed.
Switching off the hob
Press the button |
| to switch off the appliance - do not |
|
rely solely on the pan sensor.
If the control panel lock has been activated, the controls will continue to be locked even after the hob is switched on again. In order to switch the hob on again, you must first remove the lock function.
“Demo” mode
It is possible to set the hob to a demonstration mode where all the controls work normally but the heating elements do not switch on. To activate the “demo” mode the hob must be switched on, with all the hotplates switched off.
•Press and hold the + and - buttons
simultaneously for 6 seconds. When the 6 seconds have elapsed, the ON/OFF and CONTROLS
LOCKED indicator lights will flash for one second. Release the + and - buttons and press the 
button;
•The display will show the text DE and MO and the hob will be switched off.
•When the hob is switched on again it will be set to the “demo” mode.
To exit this mode, follow the procedure described above. The display will show the text DE and OF and the hob will be switched off. When it is next switched on, the hob will function normally.
7
