Hotpoint DDP-700 manual Congratulations

USER GUIDE

MODEL NAME	PAGE
DDP-700	7

GETTING STARTED

8.Press down to go to the minutes setting. The 2 digits minutes are blinking.

9.Press the minutes directly on the numeric keypad, 01=for 1 minute, 25=25 minutes.

10.Press down to go to the month setting. The 2 digits Month number are blinking.

11.Press the month directly on the numeric keypad, 01=January, 05=May, 11=November.

12Press down. The 2 digits Date are blinking.

13.Press the date directly on the numeric keypad (example : 01, 02, 10, 20, 31)

14Press . A confirmation tone is heard.

15. Press three times to exit CLOCK setting or repeat 5 to 13 to set the clock once more.

CONGRATULATIONS!

You just made the first programming - setting the clock and date on your DDP-700- digital cordless phone.

Note : When your DCT101 encountered AC power failure, or when you removed the AC adaptor, the clock will be inaccurate. Upon power up, it will be automatically set the time to 00:01 and the date to 1-01. You need to set the correct time and date when your base is power on. See Set the clock -autocalibration on page 26, this will automatically set the date and time base on the FSK CID of the PSTN network. This will only work if your PSTN connection can provide FSK CID and have the date and time information.

When your DDP-700 handset is out of battery power, just put the unit on the charge cradle on the base and the time and date will be restored. There is no need to set again the time and day.

If you register new DDP-700 handset, there is no need to set the clock on the new handset The Time and Date will synchronized to all handsets.

If you changed the Time and Date on one handset, the changes will take effect.

If you register another DECT GAP compatible to your DDP-700 base, the time and date may not be possible to display on the LCD of this new handset.