![](/images/new-backgrounds/1295207/29520727x1.webp)
USER GUIDE
MODEL NAME | PAGE |
|
|
11 | |
|
|
BASIC FUNCTIONS
Conference call
If your have more than one handset, you can have a three (3) conference call with another handset and an external call. You should know the number of the other handset register to your
1.When you are engaged in external call, press followed by the handset number where you wish to have a conference call. Internal calling tone is heard, the external call is on HOLD.
2.The Intercom called user need to press to answer the other handset call.
3. | Once the other handset has been connected, press | on your handset to active conference |
call. (The called handset by Intercom cannot initiated the conference call, only the handset who called
internal call can initiate the conference call).
4.If the called handset don’t want to have conference or no answer, the calling handset need to press
to return back to the external call.
5. | If one of the | , the other user can continue the | |
| call. If during the 3 conference call, the external call leave, the internal handset to handset connection | ||
| retain and communication is still possible, however, the busy tone is heard. To end the handset internal | ||
| call, press | on each handset. |
|
Call Shuttle
If your have more than two handsets registered to your
Sending DTMF
You can use the keypad (0 to 9, * and #) to send tones during a call. For example, to operate an answering machine, or to key in option for an automated answering services or for home banking.
Headset mode
Your
1.Plug the 2.5mm male mobile phone headset jack located on the right top corner of your
2.Wear the headset. Arranged the microphone so that it closely to your mouth. Placing and receiving a call is now possible using your headset.