ElectronicClock&Automatic

CookingFeature

Main Oven

LightTime/Mode

- +

STEP 5. Turn the +/- control knob to set the cooking

duration you require. After a few seconds the

GB

 

'cooking duration' symbol will stop flashing

 

and the display will show the temperature

 

that has been set. This will change every few

 

seconds when the display will show the

 

cooking duration remaining.

 

THE COOKING DURATION IS NOW SET.

 

The minute minder can be cancelled at any time by following STEPS 1 and 2, setting the time period to zero using the +/- control knob.

The display will revert back to the time of day.

The display shows HOURS and MINUTES eg. 1 hour

38minutes

AUTO COOKING TIMER

There are two Auto Cooking programmes for the main oven, that can be selected using the display:

(a)To set the main oven to switch ON immediately and OFF automatically after a time of your choice.

(b)To set the main oven to switch ON and OFF automatically, at the times of your choice.

(a) To set the main oven to switch ON immediately and OFF automatically:

This allows you to cook for a specified duration, after which the oven will automatically switch off.

Main Oven

LightTime/Mode

- +

STEP 1. Check that the correct time of day is set, if not follow instructions for setting the time of day.

STEP 2. Place food to be cooked on shelf in the oven. STEP 3. Switch the main oven control to the desired

mode. The display will automatically suggest a cooking temperature. This can be changed by turning the +/- control knob. (The oven will start).

STEP 4. Press the Time/Mode button, until the 'cooking duration' symbol is flashing.

At the end of the set cooking duration, 'End' will show in the display and an audible tone will be heard for a few seconds.

Turn the main oven control to 'O', the OFF position to switch the oven off. The display will revert back to the time of day.

To cancel the automatic mode at any time turn the main oven control to 'O', the OFF position.

Note: During the cooking period the cooking duration will be shown in the display for a few seconds and then revert to the temperature set.

(b) To set the main oven to switch ON and OFF immediately:

This allows you to cook for a specified duration and additionally choose the time you wish the cooking cycle to finish. From this information the system works out when the cooking cycle will need to start and automatically switches the oven on at the required time.

-Follow STEPS 1 to 5 in the previous section (a) entitled: 'To set the main oven to switch ON immediately and OFF automatically', then continue as below:

Main Oven

LightTime/Mode

- +

STEP 6. Press the Time/Mode button, until the 'end time' symbol is flashing. The display will show a default cooking end time (this will be the current time plus the cooking duration you set in STEP 5). The 'end time' symbol will flash.

9

Page 9
Image 9
Hotpoint DE89X, DQ89I1, AHP67X1 manual Cooking Duration is NOW SET, Auto Cooking Timer