D ISHWASHER
Before Using your Dishwasher
Adjusting the water softener.
Water hardness varies according towhereyoulive.Ifthewaterinyour homeishard,withoutwatersoften- ing,incrustationswouldformonyour dishes. Your dishwasher is fitted with a water softener which uses special salt to get rid of limescale in thewater.
Your dishwasher can adjust its salt consumptionaccordingtothehard- nessofthewaterinyourhome.This way,youcanoptimiseandcustom- ise your dishwasher's salt con- sumption.
To adjust salt consumption, do as follows:
1.Unscrew the salt container cap
2.There is an arrow on the neck of the container (see figure): if necessary, turn the arrow anti-
clockwise from the
Select the arrow position depending on the water hardness, referring to the table.
Salt
Filling the salt container.
Always use salt which is intended for dishwasher use.
The salt container is situated underneath the lower basket, fill it up as follows:
1.Pull out the lower basket completely, unscrew and remove the container cap
IMPORTANT:
Onlyuserecommendeddishwasher salt. DO NOT use everyday table salt, cooking salt, as they containe insoluablesubstanceswhichcould harm the dishwasher.
When to add salt:
The salt container should be filled up when the low salt indicator light “T” flashes on the control panel.
When you have loaded salt for the first time, it is normal for the low salt indicatorlighttostayonforatleast5 consecutive cycles.
| W aterHardness |
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Salt | Autono |
|
|
|
|
|
|
| consu | |
| Clarke | °fH | m m ol/l | Selector | m y | ||||
degrees | position | m ption | (cycles\2 | |||||
|
|
|
|
|
|
| (gram s/ | kg) |
|
|
|
|
|
|
| cycle) | |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
0 | 14 | 0 | 17 | 0 1,7 | / | 0 | / | |
|
|
|
|
|
|
|
|
|
14 | 36 | 18 | 44 | 1,8 | 4,4 | " " | 20 | 60 |
|
|
|
|
|
|
|
|
|
36 | 71 | 45 | 89 | 4,5 | 8,9 | M ED | 40 | 40 |
|
|
|
|
|
| |||
>71 | > 89 | > 8,9 | "+" | 60 | 25 | |||
|
|
|
|
|
|
|
|
|
Youdon'tknowhowhardthe water in your home is? Ask thecompanythatsupplies water in your area.
2.If it is the first time you add the salt, first fill the container up with water (you won't have to do this againnexttime)
3.Putthedishwasherfunnelonthe hole and pour in approximately two kilos of salt. It is normal that some water comes out of the container.
4.Screw the cap back in place carefully.
IMPORTANT NOTICE:
3in1dishwashertabletsarenowavailable.Thesecombinedetergent,salt andrinseaidALLINONE.Ifthewaterinyourareaishardorveryhard,we still recommend you add salt to the salt container to prevent white streaks on your dishes and in the dishwashers interior.
Add rinse aid to the dispenser, only if you are dissatisfied with the results. In all cases, please read the manufacturers instructions on the packet. Ifyouareonlyusingthe3in1products,afteranumberofcyclesitisnormal for the salt and rinse aid indicator lights to flash permanently.
WARNING:
DO NOT pour detergent into the special salt container.
Thiswilldestroythewatersoftener.
9
