Manuals / Hotpoint / Kitchen Appliance / Cooktop

Hotpoint EG74 Unpacking The Cooker, Levelling, CONVERSION FOR USE ON BUTANE G30 OR PROPANE G31

Models: EG74

1 32

Download 32 pages 37.54 Kb

Page 26

Installation

UNPACKING THE COOKER

Unpack the components from inside the grill and oven: Check that the following

parts are present.
Grill pan and grid	Aluminium burner bodies( 4)
Pan supports	Main oven shelves (2)
Enamelled burner caps (4)	Top oven/grill shelf (1)
Literature

LEVELLING

Four skid feet are fitted which can be adjusted up or down to level the cooker.

CONVERSION FOR USE ON BUTANE (G30) OR PROPANE (G31)

Each burner requires the injector to be replaced and bypass screws adjusted or replaced as follows:

1.Remove the loose hotplate burner parts.

2.Using a 7mm socket, replace the hotplate injectors as appropriate (see table on previous page).

3.Re-position the loose burner parts.

4.Carefully pull off the hotplate control knobs.

5.Using a narrow flat bladed screwdriver rotate the bypass screws fully clockwise.The hotplate tap bypass screws are located down the centre of the spindle.

6.Re-assemble the control panel parts.

7.Secure the self-adhesive LPG conversion label over the gas details on the data badge.

26

Image 26

Hotpoint EG74 manual Unpacking The Cooker, Levelling, CONVERSION FOR USE ON BUTANE G30 OR PROPANE G31, Installation

Contents

then retain them for future reference To the InstallerThe information can be found on the rating plate To the User Instructions for Installation and UseInstallation Instructions ContentsFor Your Safety Service InformationIntroduction ALWAYS For your SafetyPlease read the precautions below before using your cooker NEVER For your SafetyGUIDANCE ON AUTOMATIC COOKING Oven Timer OperationAUTOMATIC COOKING CLOCKFACE SYMBOLSTIMER FUNCTION BUTTONS AUTO COOKING PROGRAMMEOven Timer Operation SETTING THE TIME OF DAYSETTING THE MINUTE MINDER THE TIME OF DAY IS NOW SETa TO SET THE TIMER TO SWITCH THE OVENS ON AND OFF AUTOMATICALLY AUTO COOKING PROGRAMMESOven Timer Operation Oven Timer Operation Note Cook Period is the length of time the food requires to cookOTHER NOTES ON TIMER OPERATION Oven Timer OperationTO CANCEL AN AUTO COOKING PROGRAMME BEFORE THE COOK PERIOD HAS FINISHEDHotplate TO USE THE HOTPLATEHotplate SAFETY REQUIREMENTS FOR DEEP FAT FRYINGHOW TO DEAL WITH A FAT FIRE TO USE THE GRILL GrillGRILL PAN HANDLE TO USE THE TOP OVEN OvensTOP OVEN - CONVENTIONAL COOKING MAIN OVEN - FAN COOKINGBaking Fan Oven CookingFan Oven Cooking Top Oven CookingOven Cooking Charts OvenThe Slow Cook Setting USING THE ‘S’ SETTING FOR SLOW COOKINGREPLACEMENT OF OVEN LIGHT BULB Care and CleaningOVEN HEAT CLEAN LININGS OVEN DOORSVitreous Enamel CLEANING METHODCOOKER FINISH PaintCHECK PROBLEMSomething Wrong with your Cooker Hotplate burnerPROBLEM Disposal of your productDisposal of old electrical appliances Something Wrong with your CookerMODEL NUMBERS EG74 Category II2H3+ GB InstallationGAS SAFETY INSTALLATION & USE REGULATIONS LOCATIONG30 at 28-30mbar TECHNICAL DATAG20 at 20mbar G31 at 37mbarInstallation SPACE FOR FIXINGCOOKER HOODS 750mmCONVERSION FOR USE ON BUTANE G30 OR PROPANE G31 UNPACKING THE COOKERLEVELLING InstallationInstallation CONNECTING TO GAS SUPPLYSTABILITY CHAIN Electrical Connection Warning - THIS APPLIANCE MUST BE EARTHEDOPERATIONAL CHECKS InstallationPage Page Genuine Parts and Accessories After Sales ServiceRepair Service and Information Help Desk Extended Warranties