Care & Cleaning
WARNING:
●Switch off the electricity supply and pull out mains plug before cleaning.
Interior
*Remove salad bins, racks, shelves and baskets - wash in warm water and washing up liquid using a soft cloth, dry thoroughly.
Do not put in a dishwasher.
*Wipe the interior and fittings with a clean cloth wrung out in a solution of either one teaspoon of bicarbonate of soda to one pint of water or Milton™ sterilising fluid, diluted according to the manufacturer’s instructions.
*Dry the interior thoroughly with a clean cloth before replacing fittings and food.
Note : It is important to ensure that cleaned shelves, racks, bins and baskets are thoroughly dried before refitting to the compartments.
Exterior
*Use a clean soft cloth wrung out in warm water and washing up liquid to wipe the exterior surface, dry thoroughly.
*Use a soft brush or vacuum cleaner to remove dust from underneath the appliance and from the compressor and condenser situated at the back of the appliance. DO NOT damage the pipework.
Do not use abrasive powder, household cleaner, bleach or wax polish to clean your appliance, they leave a smell in the compartments and can damage the exterior.
Door Seals
*Use warm water and a clean soft cloth to wipe along and in between the creases of the door seals, dry thoroughly. Take care not to damage the seals and avoid using sharp objects.
Do not use detergent, it will damage the seals.
When the cleaning operations have finished, reconnect the plug with dry hands.
After the dispenser is used:
The water collector has no self drainage func- tion. So it should be cleaned regularly.
*Remove the cover by pressing the top left where marked.
*Wipe with a damp soft cloth, dry thoroughly
Replacing the light bulb
1.Unplug the appliance from the power supply.
2.Gently lift the lamp cover and pull the lamp out. Turn it
3.Replace the bulb with Max. 240V 40W bulb for refrigerators and can purchased from Hotpoint Genuine Parts & Accessories (see back cover).
Replacing the dispenser lamp:
1.Unplug the appliance from the power supply.
2.Separate the lamp by pulling it out and then remove.
3.Replace the bulb with Max. 240V 15W bulb for refrigerators and can purchased from Hotpoint Genuine Parts & Accessories (see back cover).
If the appliance is not going to be used for a long time:
During average length holidays, you will probably find it best to leave the appliance operating as usual.
If the appliance is not going to be used for some time:
Remove all food, switch off at electricity supply and unplug and then clean the appliance interior.
Leave the doors open to prevent the formation of mildew and build up of odours.
19
