Hotpoint HAG 51 G Burner and Nozzle Specification, 52TGW, HAL 51 P, HAG 51 P, HAG 51 K, Propane

Burner and Nozzle Specification

GB

V

Fig.E

I

Fig.F

Important
On completion of the operation, replace the old rating	52TGW
sticker with one indicating the new type of gas used.
This sticker is available from our Service Centres.	HAL 51 P
Note	HAG 51 P
Should the pressure of the gas used be different (or
vary) from the recommended pressure, it is necessary	HAG 51 K
to fit a suitable pressure regulator onto the inlet pipe in	HAG 51 X
compliance with current National Regulations relative
to “regulators for channelled gas”.	HAG 51 G

SS

A R

Table 1							Liquid Gas					Natural Gas
Burner	Diameter			Thermal Power		By-Pass	Nozzle		Flow*			Nozzle	Flow*
				kW (p.c.s.*)		1/100	1/100			g/h		1/100	l/h
	(mm)			Nominal	Reduced	(mm)	(mm)	***			**	(mm)
Fast	100		94	2,60	0,7	41	80	189			186	118	286
(Large)(R)
Semi Fast	75		69	1,90	0,4	30	70	138			136	104	181
(Medium)(S)
Auxiliary	51		46	1,00	0,4	30	52	73			71	76	95
(Small)(A)
Oven		-		2,60	0,6	36	71	189			186	115	248
Grill		-		2,50	1,3	63	80	182			179	122	238
Supply			Nominal (mbar)					28-30			37	20
			Minimum (mbar)					20			25	17
Pressures
			Maximum (mbar)					35			45	25

*At 15°C and 1013 mbar- dry gas

** Propane P.C.S. = 50,37 MJ/Kg

***Butane P.C.S. = 49,47 MJ/Kg Natural P.C.S. = 37,78 MJ/m3

8 PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24