3.8Helios Monitor 3000/48 (Optional)
3.8.1Mechanical Specifications
The mechanical specifications of the Helios Monitor 3000/48 are listed in Table 28.
Table 28 Mechanical specifications of the Helios Monitor 3000/48
Figure | Height | Depth | Width | Weight |
|
|
|
|
|
Figure 23 | 45 mm | 222 mm | 280 mm | 2.8 kg |
| (1.75 in.) | (8.75 in.) | (11.0 in.) | (6.2 lb) |
|
|
|
|
|
The above dimensions are without the mounting brackets. The weight may vary slightly depend- ing on the number and type of analog interface modules installed in the unit.
Figure 23 Front view of the Helios Monitor 3000/48 (without the mounting brackets)
UNIT |
|
|
|
|
ADRESS |
|
|
|
|
|
| HELIOS Monitor 3000/48 | : MODE SELECTION | |
POWER/FAIL |
| : PARAMETER SELECTION | ||
LED INDICATOR | ROTARY SWITCHES | 12 DIGIT | 4 | |
3.8.2Electrical Specifications
The input voltage of the Helios Monitor 3000/48 is
The input current drain is 400 mA. This current drain may vary slightly depending upon the number and type of analog interface modules installed in the unit.
For more detailed electrical specifications of the Helios Monitor 3000/48, refer to the appropriate user manual listed in 6.0 - Reference Documents.
3.9600 A and 1200 A Battery Disconnect Unit (Optional)
The Battery Disconnect Units are 11 inches high and provides for 500 mm (19 in.) or 600 mm
(23 in.) framework mounting or wall mounting. The units are equipped with a heavy duty circuit breaker that can be used to manually or automatically disconnect a battery string. Reconnect is manual only. The breaker is mid trip and equipped with a relay trip feature.
Figure 24 600 A Battery Disconnect Unit
600 A
BATTERY DISCONNECT UNIT
| DISABLE |
|
|
|
| TEST DISC | CALIBRATE |
|
| F1 | |||
AUTODISC | DSBL BDA | SP | FA | CAL | VOLT ADJ | GRD | 3 A | ||||||
|
|
|
| ||||||||||
OFF ON | OFF | ON |
|
|
|
|
| OFF | ON |
|
|
| |
For more detailed electrical specifications of the Battery Disconnect Unit, refer to the user man- ual,
Specifications 25
