end of the rectifier AC cord into the corresponding female receptacle behind the junction box. For the specific AC cable routing to be used with the Helios Rectifier 200E/48, refer to Figure 35 in the case of a top fed system, or to Figure 36 in the case of a bottom fed system.

11.Make the ground and line connections as applicable, at the AC service panel.

12.Install the four bolts for the DC connections to the busbar risers at the rear of the cabinet.

13.Plug one end of the control and signal cable supplied with the rectifier into the DB25 connector at the rear of the rectifier.

14.Plug the other end of the control and signal cable into the corresponding connector on the interface circuit board at the top (top fed system) or bottom (bottom fed system) of the rectifier cabinet.

15.Operate the AC circuit breaker of the new rectifier to the “ON” position.

16.With the DC breaker in the “OFF” position, adjust the float, equalize and high voltage shutdown voltage levels as required. Refer to the appropriate rectifier user manual (see 6.0 -

Reference Documents).

17.Install the corresponding sense fuse (RC) on the front of the controller.

18.Ensure that the FLS/FS switch on the rectifier is set to the same position as that of the other rectifiers in the power system.

19.Operate the DC circuit breaker of the rectifier to the “ON” position.

20.Verify that the rectifier is sharing the load by observing its ammeter. It should display approximately the same value as the ammeters on the other rectifiers. If not, adjust its float and equalize voltage levels as described in the appropriate rectifier user manual (see 6.0 -

Reference Documents).

Figure 32 AC connections in a Helios Rectifier 200E/48

Teck cable or flexible conduit

L1

L2

L3

AC cover

GRD

Partial view of the rectifier’s rear panel (right side as viewed from the rear)

TB1

42 Maintenance

Page 47 Page 49
Page 48
Image 48
Liebert 3000, 4000, 6000 A, 1500 user manual AC connections in a Helios Rectifier 200E/48
Page 47 Page 49

1500, 6000 A, 4000, 3000 specifications

The Liebert 3000 is a cutting-edge power protection solution designed to provide reliable and efficient backup power for critical applications. This uninterruptible power supply (UPS) system is engineered to safeguard sensitive electronic equipment from power disturbances, ensuring uninterrupted operations in data centers, telecommunications, and industrial environments.

One of the standout features of the Liebert 3000 is its high-efficiency design. With an efficiency rating of up to 94%, the system minimizes energy loss, resulting in lower operational costs and a reduced carbon footprint. This is particularly important in today's environmentally conscious climate, as organizations strive to meet sustainability goals while maintaining top-tier performance.

The Liebert 3000 employs advanced technologies to enhance its functionality. It incorporates online double-conversion technology, which provides a continuous supply of clean and regulated power. This technology ensures that connected loads receive stable voltage and frequency, shielding them from voltage spikes, sags, and outages. Additionally, the UPS offers features such as automatic battery testing, which helps ensure peak battery performance and reliability.

Another key characteristic of the Liebert 3000 is its modular design, allowing for flexible scalability. This means that organizations can easily expand the capacity of their UPS system as their power needs grow, without the need for extensive system overhauls. The modular architecture also facilitates simplified maintenance and reduces downtime, as individual modules can be serviced without interrupting power to the critical load.

The system is equipped with comprehensive monitoring and management capabilities. The Liebert 3000 provides real-time data on power usage, battery status, and system performance, enabling facility managers to make informed decisions and proactively address potential issues. The integration of remote management tools allows for seamless monitoring from anywhere, providing peace of mind for operators.

Overall, the Liebert 3000 combines high efficiency, advanced technology, and flexible design to deliver a robust power protection solution. Its reliability and performance make it a preferred choice for organizations seeking to protect their critical infrastructure while enhancing operational efficiency and sustainability. As businesses continue to rely on technology for their everyday operations, the Liebert 3000 stands out as a dependable safeguard against the uncertainties of power quality.
Top Page Image Contents