Hotpoint HDA750 How To Operate Your Dishwasher, ON OFF m, Drying Heat, DRYING HEAT OFF. Turns

HOW TO OPERATE YOUR DISHWASHER

STEP 1. Load your dishwasher with dishes, silverware, pots, pans, bowls, etc., according to the Loading section.

STEP 2. Add detergent to the detergent dispenser. Make sure the Cycle Indicator Dial is at OFF position before adding detergent. (See Detergent Guide).

Use rinse aid agent to help prevent spotting. Occasionally check to insure that rinse agent container is at least half full. (See How to Use a Rinse Agent section).

●For POTS & PANS, NORMAL WASH and WATER SAVER cycles:

a. Push selected cycle button.	,:~;,,			,~~y;, y];:;
b. Latch the door.
c. Slowly turn Cycle Indicator
	.,:;2:::		2..	. 8T,RT
Dial to START position to
start the cycle. You will hear	...			<	washing
	0,,;.
the motor start. There is a	dv!.g.
		Q

STEP 3. Select drying option.

DRYING HEAT ON. Turns the drying heater on for fast drying.

DRYING HEAT OFF. Turns

the drying heater off to save energy. The dishes will dry naturally over a longer period such as overnight.

DRYING HEAT

ON OFF

m

n

time delay between the start-	,(,$, !”0,00,...,..,.,!
up and the water fill so you	r

will not hear any wash action right away.

c. Latch door to start the cycle.

●For RINSE & HOLD cycle:

a. Be sure door is unlatched.	‘,:::::. ~..2.. . START
b. Select DRYING HEAT
	6:

If you need your dishes sooner, open the dishwasher door after the cycle is complete to reduce the natural drying time.

Use of this option reduces the electrical energy used by this model approximately 10~0 for the NORMAL WASH cycle.

STEP 4. WATER HEAT energy saver option

ON: The wash cycle will be	WATER HEAT
extended for 9 minutes while	ON OFF
the dishwasher heats the water	m
for good washing and drying.
The entering water must beat
least 120°F.
OFF: The entering water must be
at least 140°F. See How to Test the
Water Temperature section.

STEP 5. Select the wash cycle and start the dishwasher. (See Cycle Selection Hints).

If your dishwasher drains into a food waste disposer, operate the disposer until it is empty before starting the dishwasher.

To obtain the benefits of a complete cycle, be careful that you do not turn the dial any farther than necessary to start the dishwasher.

OFF drying option.	oFF ●	washi”g
c. Slowly turn the Cycle	dry,”g ● <
Indicator Dial to the	~~O
	RINSE &HOLD	. T!KO!!t”rO,r

RINSE & HOLD position. ~

d. Latch the door to start the cycle.

●When NOT using DELAY START (for all cycles):

a. Be sure door is unlatched. b. Push selected cycle button.

c. Slowly turn Cycle Indicator Dial to START. d. Latch the door to start the dishwasher.

●When using DELAY START (for all cycles except RINSE & HOLD):

Note: START can be delayed			P:;;,* ,~~:f,	:;;[;
automatically for up to 6 hours.
a. Be sure door is unlatched.
b. Push selected cycle button.		,,&,f)., 2.. . START
c. Slowly turn Cycle Indicator		,,,;‘:.. A		washing
Dial to desired delay time.	drying .			/
			Q

d. Latch door to start timer. Ther‘INSE*HOLD.”S”IO

DELAY light will come on and

stay on until dishwasher starts. Dishwasher

will start automatically at end of selected delay time.

4