Hotpoint HDA799M warranty Problem Solver, Tub

The Problem Solver (continued)

PROBLEM	POSSIBLE CAUSE AND REMEDY
CHIPPING OF CHINA	Rough handling can cause chipping. Load with care. Make sure glassware and china are
	secure and can’t jar loose. (See pages 8 & 9 for correct way to load glassware,) Make sure
	Ml glasses and stemware will clear the top of tie tub when you push the rack into the
	dishwasher.
	Always use the top rack for delicate items.
SMALL AMOUNT OF	Water around the outlet on the tub bottom at tie back of the tub is normal. It is clean
WATER STANDING	water. It’s there to keep the water sed lubricated.
IN THE BmM
OF THE TUB
WATER WON’T PUMP	If the entire bottom of the tub has water, you may have a drain problem. Clean the air gap,
OUT OF THE TUB	if you have one. (Seepage 11.)
	Check the kitchen sink. Is it draining well? You may need a plumber.
	If dishwasher drains into disposer, run disposer to clear. Be sure disposer is not clogged.
SUDS IN THE TUB	Sudsing detergents are not meant for dishwashers. USE ONLY AU~MATIC
	DISHWASHER DETERGENTS ~ AVOID SUDSING.
	To remove suds from the tub: Opn the dishwasher. Let suds evaporate. Add 1 gallon of
	cold water to the tub. Close and latch the dishwasher. Pump out water by slowly turning
	the control did until a drain period is reached.
	Repeat if necessary.
DISHWASHER LEKS	Suds can cause unit to overflow. That’s why it’s so important to use a detergent that’s
	designed for automatic dishwashers.

Hyou need more help.. ● ll, to~ free:

GE =er CentiP 8~262~

consumer information service

14