How to operate your dishwasher
Door Latch | Cycle Indicator Dial | ||||||||
(Logked) |
| (Turn to Start) | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
STEP 1. Load your dishwasher with dishes, silverware, pots, pans, bowls, etc. according to instructions on pages 8 and 9.
STEP 2. Add detergent to the detergent dispenser. Make sure the Cycle Indicator Dial is at OFF position before adding detergent. (See pages 6 and 7.)
STEP 3. Select DRYING HEAT Option. It must be ON for PLATE WARMER cycle, OFF for RINSE HOLD cycle. It can be ON or OFF, at your option (see below), for any of the wash cycles.
DRYING HEAT
ON OFF
1I
ON. Turns the drying heater on for fast drying.
OFF. Turns the drying heater off to save energy. Dishes will dry naturally over a longer period such as overnight.
If you need your dishes sooner, open the dishwasher door after the cycle is complete to reduce the natural drying time.
Use of this option reduces the electrical energy used by this model approximately 8% for the NORMAL WASH cycle.
Estimated yearly savings, depending on your local electrical rates, are as follows:
STEP 4. Select the cycle and start the dishwasher.
If your dishwasher drains into a food waste disposer, operate the disposer until it is empty before starting the dishwasher. (See Cycle Selection Hints at right,)
To obtain the benefits of a complete cycle, be careful that you do not turn the dial any further than necessary to start the dishwasher.
. For POTS & PANS, NORMAL WNH and LIGHT WASH cycles:
POTS NORMAL LIGHT
&PANS WASH WASH
a.Push selected cycle button.
b.Latch the door.
ON ●
OFF ■
I | :WARMER |
(WSHM”I.G.F.T.. ,“,,0., |
c. Slowly turn Cycle Indicator Dial to ON position to start the cycle.
●For RINSE HOLD cycle:
a. Be sure door is unlatched.
b. Select DRYING
c. Slowly turn Cycle Indicator Dial to RINSE HOLD position.
d. Latch the door to start the cycle,
.—
4
