Hotpoint HE9L493 manual Wash cycles, Table of wash cycles

Wash cycles

	Table of wash cycles
GB
	cycles	Description of the wash cycle
	Wash

Essentials

1Anti Stain

2 Whites

3 Cotton Standard 60°C (1): heavily soiled whites and resistant colours.

4 Cotton Standard 40°C (2): lightly soiled resistant and delicate colours.

5Synthetics: heavily soiled resistant colours.

5Synthetics (3): lightly soiled resistant colours.

Specials

6Anti Allergy

7 Baby

8 Wool: for wool, cashmere, etc.

9 Delicates

10Fast Wash 60’: to refresh normal soiled garments quickly (not suitable for wool, silk and clothes which require washing by hand).

Eco Cycle

11Cotton Standard 20°: lightly soiled resistant and delicate colours.

12Cottons

13Synthetics

14Fast Wash

Partials cycles

ARinse

B Spin+Pump out

Max.	Max.	Detergents		loadMax.	(kg)	Residual dampness%	conEnergy- kWhsumption	waterTotallt	duraCycle- tion
	spe-	Wash	Fabric softener
temp.
	ed
(°C)
	(rpm)

40°	1400			5	-	-	-	180’
60°	1400			5	-	-	-	180’
60°	1400			9	53	1.37	57.5	195’
(Max. 90°)
40°	1400			9	53	1.09	92	180’
60°	800			4.5	46	1.03	60	115’
40°	800			4.5	46	0.56	60	100’
60°								195’
	1400			5	-	-	-
40°	1000			5	-	-	-	145’
40°	800			2	-	-	-	90’
30°	0			1	-	-	-	80’
60°	1400			3.5	53	0.84	44	60’
20°								175’
	1400			9	-	-	-
Cold
	1400			9	53	0.23	68	80’
Water
Cold	800			3	48	0.12	37	70’
Water
Cold	800			3	71	0.10	36	30’
Water
-								36’
	1400	-		9	-	-	-
-	1400	-	-	9	-	-	-	16’

The length of cycle shown in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.

1) Test wash cycle in compliance with directive 1061/2010: set wash cycle 3 with a temperature of 60°C.

This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be washed at 60°C. The actual washing temperature may differ from the indicated value.

2) Test wash cycle in compliance with directive 1061/2010: set wash cycle 4 with a temperature of 40°C.

This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be washed at 40°C. The actual washing temperature may differ from the indicated value.

For all Test Institutes:

2)Long wash cycle for cottons: set wash cycle 4 with a temperature of 40°C.

3)Long wash cycle for synthetics: set wash cycle 5 with a temperature of 40°C.

10