Customer Service Troubleshooting Tips Care and Cleaning Operating Instructions Safety Instructions
Before You Call For Service…
Troubleshooting Tips
Problem |
| Possible Causes | What To Do | |
|
|
|
|
|
Oven door will |
| Oven too hot. | • Turn the Oven Temperature knob to CLEAN. | |
not lock |
|
|
| The glowing oven cleaning light after the knob is turned |
|
|
|
| indicates the oven is too hot from previous use. To cool |
|
|
|
| the oven, open the door wide, and allow the oven to cool. |
|
|
|
| After the oven has cooled, close the door and slide the |
|
|
|
| latch handle all the way to the right. |
|
|
|
|
|
|
| Door latch handle may not | • Lift the cooktop and pull the door latch handle | |
|
| be fully extended from the | into the lock position. | |
|
|
| ||
|
| models) position. |
| |
|
|
|
| |
Oven not clean after |
| Oven controls not | • See the Using the | |
a clean cycle |
| properly set. |
| |
|
|
|
| |
|
| Oven was heavily soiled. | • Clean up heavy spillovers before starting the clean | |
|
|
|
| cycle. Heavily soiled ovens may need to |
|
|
|
| again or for a longer period of time. |
|
|
|
| |
CLEAN light flashes |
| Oven controls not | • Move the door latch handle to the right before | |
|
| properly set. | setting the Oven Temperature knob to CLEAN. | |
|
|
|
| |
Oven makes |
| This is the sound of the | • This is normal. | |
clicking noise |
| heating element turning |
| |
|
| off and on during |
| |
|
| cooking functions. |
| |
|
|
|
| |
“F— and a number |
| You have a function | • If a function error code appears during the self- | |
or letter“ flash in |
| error code. | cleaning cycle, check the oven door latch. The latch | |
the display |
|
|
| may have been moved, even if only slightly, from the |
|
|
|
| locked position. Make sure the latch is moved to the |
|
|
|
| right as far as it will go. Turn the Oven Temperature |
|
|
|
| knob to OFF. Allow the oven to cool for one hour. |
|
|
|
| Put the oven back into operation. |
|
|
|
|
|
|
| If the function code repeats. | • Disconnect all power to the range for at least 30 | |
|
|
|
| seconds and then reconnect power. If the function |
|
|
|
| error code repeats, call for service. |
|
|
|
| |
“Burning” or “oily” |
| This is normal in a new | • To speed the process, set a | |
odor emitting from |
| oven and will disappear | minimum of 3 hours. See the Using the self- | |
the vent |
| in time. | cleaning oven section. | |
|
|
|
| |
Strong odor |
| An odor from the insulation | • This is temporary. | |
|
| around the inside of the oven |
| |
|
| is normal for the first few times | ||
|
| the oven is used. |
| |
|
|
|
| |
Fan noise |
| A cooling fan may | • This is normal. The cooling fan will turn off and on. | |
|
| automatically turn on and |
| |
|
| off to cool internal parts. |
| |
|
|
|
|
|
28
