INSTALLATION

1. GENERAL

The appliance is designed for mounting at a safe level into an oven housing which must be secured to the backing wall.

2.VENTILATION

a.The oven housing unit cabinet dimensions must comply with fig. 4.

b.An air gap of 30mm minimum must be provided at the rear of any top or bottom cupboards or shelves (see fig. 1).

c.It is necessary that the cabinets are provided with unobstructed ventilation, i.e. from adjacent cabinetry. This can be done by either raising the base of the cabinets using the adjusting feet (or spacers) or alternatively by providing a slot in the cabinet plinth to the dimensions in fig. 1.

d.The air gap at rear allows the warmed air to pass out of the inner cabinet space. Where it is intended to fit cupboards above the oven unit to ceiling height, it is essential that the warmed air is exhausted through the front of the cabinet (see fig. 1).

e.If an oven unit is installed adjacent to a tall cabinet, steam escaping from the oven when the door is opened could condense on and maybe stain the adjacent surface. To prevent permanent staining, the adjacent surface should be made of a material that is heat resisting and easy to clean. Adjacent tall cabinets should not be deeper than the oven housing cabinet.

3.FINAL INSTALLATION

a.Using a spirit level, check that the housing cabinet is level from side to side and from front to back in its installed position.

b.Correct any unevenness by placing spacers under the bottom of the cabinet. Make sure that the cabinet rests firmly on the floor without rocking.

c.Before the oven is fitted, the cabinet must be firmly secured to the backing wall for stability.

d.The oven unit should now be lifted (this is a two person lift) into the cabinet and pushed fully home.

e.Finally, the oven is secured to the cabinet by means of the four Pozi Wash Head screws - two through each side trim.

f.Remove all packaging material from the grill and oven interior.

LIST OF LOOSE ITEMS

4 x Pozi Wash Head No. 6 x 15mm screws.

Note: This appliance must not be installed over any other appliance that generates heat.

27

Page 26 Page 28
Page 27
Image 27
Hotpoint S230G DY230G manual General, Ventilation, Final Installation, List of Loose Items
Page 26 Page 28

S230G DY230G specifications

The Hotpoint S230G DY230G is a remarkable refrigerator that stands out in the competitive world of kitchen appliances. Designed with both efficiency and modern aesthetics in mind, this appliance offers a blend of functionality and style that suits any contemporary home.

One of the main features of the S230G DY230G is its impressive cooling system. This model employs advanced MultiAir Flow technology, which ensures an even distribution of cold air throughout the refrigerator compartments. This feature helps to maintain optimal temperatures, preserving food freshness for longer periods and reducing spoilage.

In addition to excellent cooling performance, this refrigerator boasts a generous storage capacity, making it ideal for families and meal planners. The interior is designed with flexible shelving, allowing users to customize their storage space according to their needs. The adjustable shelves can be easily rearranged to accommodate taller items or bulky containers, enhancing usability.

The S230G DY230G also integrates No Frost technology, which eliminates the need for manual defrosting. This innovative feature ensures that ice buildup is minimized, leading to less maintenance for the user. The result is a hassle-free refrigeration experience, allowing you to focus on what truly matters—your food and family.

Energy efficiency is another hallmark of this model. The refrigerator has been rated highly for its energy consumption, integrating Eco Mode settings that optimize performance while reducing electrical use. This commitment to energy efficiency not only helps in lowering utility bills but also contributes positively to environmental sustainability.

Additional features of the Hotpoint S230G DY230G include an interior LED lighting system that illuminates every corner of the refrigerator, making it easy to locate items even in low light. Furthermore, the model is equipped with a modern control panel that allows users to adjust temperature settings and activate different modes with ease.

In terms of design, the sleek exterior of the S230G DY230G complements various kitchen styles. Its stainless-steel finish provides a modern look while also being easy to clean. With its combination of advanced features, user-friendly design, and energy-efficient operation, the Hotpoint S230G DY230G is an excellent choice for anyone looking to enhance their kitchen with a reliable and stylish refrigerator.
Top Page Image Contents