Electrical Connection

Electrical connection

The electrical connection to the mains must be made on the appliance. The power voltage and frequency are as indicated on the rating plate.

!THIS APPLIANCE MUST BE EARTHED.

Connecting the power supply cable

To open the terminal board:

Using a screwdriver, press on the tabs situated on each side of the terminal board cover.

Pull open the terminal board cover.

To connect the power supply cable, proceed as follows:

_Unscrew the cable clamp screw and the contact screws L-N-$.

Fasten the wires beneath the screwheads using the following colour scheme: Blue (N) Brown (L) Yellow-Green￿ $

Fasten the power supply cable in the corresponding cable clamp and close the cover.

Power cable supply connection to the electrical

mains:GB

We recommend you use a power supply cable which is long enough to allow you to take the oven out of its recess in the event of maintenance operations (only use HAR - H 05 - RRF quality cables fitted with a plug conforming to the regulations in force.

The plug must be accessible at all times.

Unplug the appliance before all operations, even when replacing the oven lamp.

Using the appliance without correct earthing is highly dangerous.

!After connecting the appliance to the flexible cable, tighten all the screws on the terminal board.

TABLE OF CHARACTERISTICS

 

width 43.5 cm

Dimensions

height 32 cm

 

depth 40 cm

Volume

56 l

Electrical

voltage: 220-240V ~ 50/60Hz

 

Electrical Connection:

4 2 N L

Voltage Frequency: 230 V-1+N 50Hz

Fuse Section: 16A Supply cable:

3x1.5mm2

connections

maximum power absorbed

2800 W

 

 

 

 

Directive 2002/40/EC on the

 

label of electric ovens.

 

Regulation EN 50304

 

ENERGY LABEL

Declared energy

 

 

 

 

consumption for Forced

 

convection Class

 

 

– heating mode:

Gratin

This appliance conforms to the following European Economic Community directives: 2006/95/EEC dated 12/12/06 (Low

You can connect your oven to the system means of a terminal board. Refer to above information for the minimal cable sections and the calibration of the protective elements according to the connection.

If the appliance is installed with a junction box, an omnipolar circuit breaker - with a minimum contact opening of 3mm - should be installed between the appliance and the mains.

Voltage) and subsequent amendments - 89/336/EEC dated 03/05/89 (Electromagnetic Compatibility) and subsequent amendments - 93/68/EEC dated 22/07/93 and subsequent amendments.

2002/96/EEC

3

Page 3
Image 3
Hotpoint SE1032X operating instructions Electrical Connection, This Appliance Must be Earthed

SE1032X specifications

The Hotpoint SE1032X is a cleverly designed built-in single oven that offers a perfect blend of functionality, style, and technology. This oven suits both modern and traditional kitchens, boasting a sleek stainless steel finish that enhances any cooking space. Its compact design maximizes kitchen space while still providing ample cooking capacity for family meals and entertaining.

One of the standout features of the Hotpoint SE1032X is its impressive multifunctional cooking capabilities. With a variety of cooking functions, including conventional cooking, fan-assisted cooking, and grill options, users can easily tailor their cooking experience. The fan-assisted function promotes even heat distribution, ensuring that dishes cook to perfection without the need for constant monitoring.

In terms of capacity, the oven boasts a generous interior, allowing users to roast large cuts of meat, bake multiple trays of cookies, or prepare casseroles with ease. The internal light ensures that users can keep an eye on their food without opening the door, helping maintain a consistent temperature.

The oven is equipped with several advanced technologies designed to enhance performance and ease of use. One notable innovation is the Hydro Clean technology, which simplifies cleaning. By using steam to loosen food residues, users can effortlessly wipe away messes with minimal effort. The smooth enamel interior also prevents food from sticking, making cleaning even more convenient.

Energy efficiency is another crucial characteristic of the Hotpoint SE1032X. It comes with an A energy rating, ensuring that users can enjoy high-performance cooking without incurring excessive energy costs. This is a significant consideration for environmentally conscious consumers looking to reduce their carbon footprint while still enjoying a versatile cooking appliance.

Controlling the oven is intuitive, thanks to its user-friendly dial and digital display. The simple interface allows quick adjustments to cooking settings and temperatures, making it accessible for both experienced chefs and beginners alike.

In summary, the Hotpoint SE1032X is an excellent choice for anyone in need of a reliable and stylish built-in single oven. Its versatility, innovative cleaning technologies, energy efficiency, and user-friendly design make it a valuable addition to any kitchen. Whether baking, roasting, or grilling, this oven ensures consistently delicious results, making it a favored appliance among home cooks.