Installation
Before operating your new appliance please read
GB | this instruction booklet carefully. It contains |
| |
| important information concerning the safe operation, |
| installation and maintenance of the appliance. |
| Please keep these operating instructions for future |
| reference. Make sure that the instructions are kept |
| with the appliance if it is sold, given away or moved. |
OKOK
If the appliance is fitted under the counter, make sure that the hob piping is positioned correctly and that it does not interfere with the oven during installation or obstruct the rear vents of the cooling fan.
Positioning
Keep all packaging materials out of the reach of children. It may present a choking or suffocation hazard (see Precautions and tips).
The appliance must be installed by a qualified person in compliance with the instructions provided. Incorrect installation may cause harm to people and animals or may damage property.
The appliance must not come into contact with electrical parts once it has been installed.
The indications for consumption given on the data plate have been calculated for this type of installation.
Ventilation
To ensure adequate ventilation is provided, the back panel of the cabinet must be removed. It is advisable to install the oven so that it rests on two strips of wood, or on a completely flat surface with an opening of at least 45 x 560 mm (see diagrams).
Use the appropriate cabinet to ensure that the appliance functions properly.
• | The panels adjacent to the oven must be made of |
| |
• | Cabinets with a veneer exterior must be |
| assembled with glues which can withstand |
| temperatures of up to 100°C. |
• | To install the oven under a counter (see diagram) |
Centring and fixing |
. | 45 | mm |
|
m |
| . | |
m |
|
| |
560 |
|
|
|
or in a kitchen unit, the cabinet must have the |
following dimensions: |
Position the 4 tabs on the side of the oven so that they are lined up with the 4 holes on the outer frame. Adjust the tabs according to the thickness of the cabinet side panel, as shown below:
480 mm. | 7 mm. |
470 mm. | |
| 3 mm. |
|
|
|
| . |
|
|
| in | |
|
| .m |
| |
| m |
|
| |
| m |
|
|
|
547 |
|
|
| |
|
|
| . |
|
45 | mm |
| ||
|
|
|
| |
| 558 | mm. | ||
|
|
| ||
475 mm.
20 mm thick: take off the removable part of the tab (see diagram).
595 | m |
|
|
| . |
| m. | 545 | mm | ||
|
|
| |||
|
|
| . |
|
|
|
|
| mm |
|
|
24,5 |
|
|
| ||
18 mm thick: use the first groove, which has already been set in the factory (see diagram).
2
