Care and Maintenance
Replacing the oven light
GB
IMPORTANT:
The oven light must have these precise features:
a)it must be able to resist high temperatures (up to 300°C)
b)power supply: see V/ Hz indicated on data plate.
c)power 25W.
d)E 14 connection.
Before proceeding, disconnect the appliance from the main electricity supply.
•to prevent damage, place a tea cloth in the oven
•nscrew the glass cover of the light
•unscrew the old light bulb and replace it with the new one
•put back the glass cover and remove the tea cloth
•connect the appliance to the main electricity supply
•Remove the four plastic caps from the opposite side and unscrew the locking pin.
•Turn the door 180°.
•Secure the door in its new position using the 4 screws removed previously.
NOTE: Make sure that the oven door is perfectly parallel with the front panel. If it is not, adjust it by means of the screws you have just inserted.
•Fix the oven in the oven recess using the 4 screws and the plastic spacers provided.
Removing the oven door
•Decide whether you want the door to open to the left or right before positioning the appliance in the oven recess.
•Fully open the door.
• Remove the four fixing screws from the door hinge.
•Screw in the door closing pin and secure it in horizontal position as shown in the figure, or until it locks in place in the case of a round pin. Fit the 4 plastic caps.
•Adjust the door closing mechanism by means of the adjuster screws as shown in the figure.
6