Left | Right guide | |
guide rail | rail |
|
B |
|
|
| C |
|
| of | |
|
| Direction |
|
| extraction |
2.Choose which shelf to use with the sliding rack. Paying attention to the direction in which the sliding rack is to be extracted, position joint B and then joint C on the frame.
3. Scroll through the menu commands using the
GB
control dial, select PYROLYTIC and press | . |
4.The appliance suggests a “NORMAL” pyrolytic cycle, with a duration of 1 hour 30 minutes. Other levels of cleaning may be selected.
• Use the control dial to select one of the following:
-“ECONOMY”: duration 1 hour
-“NORMAL”: duration 1 hour and 30 minutes
-“INTENSIVE”: duration 2 hours.
| 3. Secure the two frames | |
| with the guide rails using | |
| the holes provided on | |
| the oven walls (see | |
| diagram). The holes for | |
| the left frame are | |
D | situated at the top, while | |
the holes for the right | ||
| ||
| frame are at the bottom. | |
| 4. Finally, fit the frames | |
| on the spacers A. |
!Do not place the sliding racks in position 5.
Automatic cleaning by PYROLYSIS
The cleaning cycle can cause the internal temperature of the oven to reach 500°C. The pyrolytic cycle is activated, burning away food and grime residues. Dirt is literally incinerated.
Keep children away from the appliance during the automatic cleaning cycle as surfaces may become very hot. Particles may ignite inside the oven as a result of the combustion process. There is no cause for concern: this process is both normal and hazard- free.
Before initiating the PYROLYTIC cycle:
•clean the oven door;
•remove large or coarse food residues from the inside of the oven using a damp sponge. Do not use detergents;
•remove all accessories and the sliding rack kit (where present);
•do not place tea towels or pot holders over the oven handle.
!If the oven is too hot, the pyrolytic cycle may not start. Wait for the oven to cool down.
!The programme may only be started once the oven door has been closed.
To activate the cleaning cycle 
:
1.Press 
to switch on the control panel.
2.Press the 
icon.
• Press | again. |
5. Press | to begin the PYROLYTIC cycle. |
Safety devices
•The door locks automatically as soon as the
temperature reaches a high value; the 
icon lights up on the display.
•Pressing the 
icon cancels the cleaning cycle at any time.
•If a malfunction occurs, the heating elements will be switched off.
•Once the oven door has been locked, you cannot change the duration and end time settings.
Programming delayed automatic cleaning
!Programming is possible only after selecting the cleaning cycle.
1.Press the 
icon twice; the end of pyrolysis time will begin to flash.
2.Turn the control dial to adjust the end of pyrolysis time; hold the dial in this position to scroll through the numbers more quickly and make the setting process easier. The display will show a graphic indicating the delayed start in bar format.
3.Once you have reached the desired end time,
press the 
icon again. The delayed start bar will show the current time, the time remaining until the start of pyrolysis, the duration and the end of pyrolysis time as a graphic.
4.Press 
to begin the pyrolysis schedule.
5.The display shows the remaining time, moving the delayed start bar backwards.
6.Once pyrolysis has begun, the display will indicate the remaining time by filling the duration bar.
6.When the time has elapsed, “CLEANING CYCLE FINISHED” appears on the display and a buzzer sounds.
• For example: it is 9:00 a.m. and the Economy PYROLYTIC cycle has been selected: default set time 1 hour. 12:30 is scheduled as the end time. The programme will start automatically at 11:30 a.m.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
17
