GB
icon, then press and follow the steps described. 1. Scroll through the menu commands using the
control dial, select CLOCK and press 
.
2.Adjust the time using the control dial.
3.Once you have reached the correct hour value,
press the 
icon.
4.Repeat steps 2 and 3 to set the minutes.
5.To exit adjustment mode, press the 
icon or use the control dial to scroll through the menu until
you reach EXIT, then press 
.
!The clock can also be set while the oven is off, by
pressing the 
icon and carrying out steps 2 to 4 as described above.
After the appliance has been connected to the mains, or after a blackout, the clock will need to be reset.
Setting the minute minder
!The minute minder may be set regardless of whether the oven is switched on or off. It does not switch the oven on or off.
When the set time has elapsed, the minute minder emits a buzzer that will automatically stop after 30 seconds or when any active button on the control panel is pressed.
To adjust the minute minder, proceed as follows:
1.Press the 
icon.
2.Set the desired time using the control dial.
3.Once you have reached the desired value, press
the 
icon again.
When the oven is switched off, the countdown appears
on the display. When the oven is on, the lit 
symbol will remind you that the minute minder is active.
To cancel the minute minder, press the 
icon and use the control dial to set the time to 00:00. Press
duration may be set.
Press the 
icon to select the desired automatic cooking mode. The cooking temperature and duration are both set to default values. Only the duration may be adjusted in accordance with the selected mode. The text “AUTO” appears on the display to indicate that the temperature is following a precise cooking profile. A delayed cooking cycle may be programmed.
3.Press 
to start the cooking mode.
4.The oven will begin its preheating phase, the preheating indicators will light up as the temperature rises.
5.When the preheating process has finished, a buzzer sounds and all the preheating indicator lights show that this stage has been completed: the food can then be placed in the oven.
6.During cooking it is always possible to:
-adjust the temperature by pressing the 
icon, turning the control dial and confirming by pressing
again (manual modes only );
-set the duration of a cooking mode (see Cooking Modes);
-stop cooking by pressing the 
icon. In this case the appliance stores the temperature modified previously in its memory (manual modes only);
-switch off the oven by pressing the 
icon for 3 seconds.
7. If a blackout occurs while the oven is already in operation, an automatic system within the appliance will reactivate the cooking mode from the point at which it was interrupted, provided that the temperature has not dropped below a certain level. Programmed cooking modes which have not yet started will not be restored and must be reprogrammed (for example: a cooking mode has been programmed to start at 20:30. At 19:30 a blackout occurs. When the power supply is restored, the mode will have to be reprogrammed).
again.
The 
icon will switch off to indicate that the minute minder has been disabled.
Starting the oven
1.Press 
to switch on the control panel. The appliance buzzer sounds three times (ascending).
2.Press the 
icon to select the desired manual cooking mode. The cooking temperature and
!There is no preheating stage for the GRILL mode.
!Never put objects directly on the bottom of the oven; this will prevent the enamel coating from being damaged.
!Always place cookware on the rack(s) provided.
Cooling ventilation
In order to cool down the external temperature of the oven, a cooling fan blows a stream of air between the control panel and the oven door, as well as towards the bottom of the oven door. At the beginning of the cleaning cycle, the cooling fan operates at low speed.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
6
