!If the oven is too hot, the pyrolytic cycle may not start. Wait for the oven to cool down.
!The programme may only be started once the oven door has been closed.
To activate the Fast Clean programme:
1.Switch the control panel on by pressing the 
button.
2.Press button 
; the display will show the text “Piro”,
“nor” and the default duration of 1:30 h (normal cycle) alternately.
3.Press button 
, then turn the TIMER knob to adjust the default cleaning level. There are 3 different levels to choose from, each with a
1.Economy (ECO): turn the knob towards
2.Normal (NOR): initial level. Duration 1 hour and 30 minutes.
3.Intensive (INT): turn the knob towards “+”. Duration 2 hours.
4.Press the 
button to confirm.
5.Press the 
button to begin the cleaning cycle.
An end time for the FAST CLEAN cycle (as for a normal cooking cycle) may be programmed (see Programming the automatic cleaning end time).
Safety devices
•the door locks automatically as soon as the temperature
reaches a high value; the 
icon lights up on the display;
•pressing the 
button cancels the cleaning cycle at any time;
•if a malfunction occurs, the heating elements will be switched off;
•once the oven door has been locked, you cannot change the duration and end time settings.
Programming the automatic cleaning end time
GB
1.Press the 
button twice: the 
icon and the numerical digits on the display will begin to flash.
2.Turn the TIMER knob towards “+” and
3.Once you have reached the desired end time, press the
button again. The display will show the duration, the cleaning end time and the set cleaning level alternately.
4. Press the 
button to activate the programmed mode.
Programming has been set when the 
and 
buttons are illuminated.
5.Once cleaning has finished, “END” appears on the display and a buzzer sounds.
• For example: it is 9:00 a.m. and the Economy (ECO) FAST CLEAN level has been selected, with the default duration of 1 hour. 12:30 is scheduled as the end time. The programme will start automatically at 11:30 a.m.
To cancel programming press the 
button.
Once the automatic cleaning cycle is over
Before you can open the oven door, you will have to wait
for the 
icon to switch off: this indicates the oven temperature has dropped to an acceptable level. You will notice some white dust deposits on the bottom and the sides of your oven; remove these deposits with a damp sponge once the oven has cooled down completely. Alternatively, you can make use of the already heated oven, in which case it is not necessary to remove the deposits, they are completely harmless and will not affect your food in any way.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
13
