Electrical Connection

Electrical connection

The electrical connection to the mains must be made on the appliance. The power voltage and frequency are as indicated on the rating plate.

!THIS APPLIANCE MUST BE EARTHED.

Connecting the power supply cable

To open the terminal board:

Using a screwdriver, press on the tabs situated on each side of the terminal board cover.

Pull open the terminal board cover.

To connect the power supply cable, proceed as follows:

Unscrew the cable clamp screw and the contact screws L-N-.

Fasten the wires beneath the screwheads using the following colour scheme: Blue (N) Brown (L)

Yellow-Green

Fasten the power supply cable in the corresponding cable clamp and close the cover.

Electrical Connection:

Voltage Frequency: 230

V-1+N 50Hz

Fuse Section: 16A

Supply cable: 3x1.5mm2

4 2 N L

You can connect your oven to the system means of a terminal board. Refer to above information for the minimal cable sections and the calibration of the protective elements according to the connection.

If the appliance is installed with a junction box, an omnipolar circuit breaker - with a minimum contact opening of 3mm - should be installed between the appliance and the mains.

Power cable supply connection to the electrical

mains:GB

We recommend you use a power supply cable which is long enough to allow you to take the oven out of its recess in the event of maintenance operations (only use HAR - H 05 - RRF quality cables fitted with a plug conforming to the regulations in force.

The plug must be accessible at all times.

Unplug the appliance before all operations, even when replacing the oven lamp.

Using the appliance without correct earthing is highly dangerous.

!After connecting the appliance to the flexible cable, tighten all the screws on the terminal board.

DATA PLATE

 

Dimensions

width cm 43.5

height cm 32

 

depth cm 41.5

Volume

lt. 58

 

voltage: 230-240V ~ 50/60 Hz or

Electrical

50Hz (see data plate)

connections

maximum power absorbed

 

2250-2400W

 

Directive 2002/40/EC on the label

 

of electric ovens.

 

Standard EN 50304

 

Energy consumption for Natural

ENERGY LABEL

convection – heating mode:

Convection mode

 

 

Declared energy consumption for

 

Forced convection Class – heating

 

mode: Multi-cooking

 

This appliance conforms to the

 

following European Economic

 

Community directives:

 

- 2006/95/EEC of 12/12/06 (Low

 

Voltage) and subsequent

 

amendments;

 

-2004/108/EEC of 15/12/04

 

(Electromagnetic Compatibility) and

 

subsequent amendments;

 

- 93/68/EEC of 22/07/93 and

 

subsequent amendments.

 

- 2002/96/EC and subsequent

 

amendments.

3

Page 3
Image 3
Hotpoint SH53K, SY51, SH53X Electrical Connection, Electrical connection, Connecting the power supply cable, Yellow-Green 

SH51X, SH53X, SH53CKX, SHS53CX, SH53K specifications

Hotpoint has long been known for its commitment to quality and innovation in home appliances. The Hotpoint SY51, SH53CX, SHS53X, SH53K, and SHS53CX models stand out in the market for their distinctive features and advanced technologies designed to enhance user experience in the kitchen.

The Hotpoint SY51 is an efficient and reliable appliance known for its spacious design, making it ideal for families and those who enjoy cooking. With a generous capacity, it accommodates large dishes and multiple cooking trays at once. The model also incorporates advanced cooking technology that ensures even heat distribution, resulting in perfectly cooked meals every time. The SY51’s intuitive controls make it easy for users to select their desired cooking modes and set timers effortlessly.

Moving on to the SH53CX and SH53K, these models are celebrated for their sleek aesthetics and user-friendly interfaces. Both feature a modern stainless-steel finish that blends seamlessly with contemporary kitchen designs. The SH53CX introduces unique steam cooking capabilities, which allow for healthier meal preparation while preserving nutrients and flavor. The SH53K, on the other hand, stands out with its advanced energy efficiency, utilizing cutting-edge insulation technology to reduce energy consumption without compromising performance.

The SHS53X and SHS53CX add even more versatility. These models are equipped with smart cooking functions that take the guesswork out of meal preparation. Users can access pre-set cooking programs tailored for various cuisines, minimizing preparation time for busy households. The SHS53X emphasizes intuitive touch controls, while the SHS53CX features Wi-Fi connectivity, allowing users to control cooking settings remotely via a dedicated app—perfect for those on the go.

All models are designed with safety features that include child locks and automatic shut-off functions, ensuring peace of mind during use. Their easy-to-clean surfaces and removable parts make maintenance straightforward, allowing users to spend less time cleaning and more time enjoying their culinary creations.

In summary, the Hotpoint SY51, SH53CX, SHS53X, SH53K, and SHS53CX models showcase a blend of style, efficiency, and advanced technology. They cater to the needs of modern home cooks, offering a range of features that enhance cooking convenience while maintaining high-quality performance. Whether you're looking for steam cooking capabilities, energy efficiency, or smart technology integration, these Hotpoint appliances provide a solution for every kitchen.