Hotpoint UE47 If something goes wrong, Problem, Check, Nothing works, Display shows 0.00 AUTO

Models: UE47 UQ47

1 40
Download 40 pages 59.82 Kb
Page 37
Image 37
If something goes wrong...

If something goes wrong...

Before calling a Service Engineer, please check through the following lists.

THERE MAY BE NOTHING WRONG.

Problem

 

Check

 

 

 

Nothing works.

 

(a) Check

 

 

If you find :-

 

 

Display is blank.

 

 

Then it is likely that there is no electricity supply to your oven.

 

 

Check: (i) That the main cooker wall switch is turned on.

 

 

(ii) Check other appliances to see if you have a power cut.

 

 

(iii) Check the main circuit breaker for the property.

 

 

 

Display shows 0.00 AUTO.

 

The power supply to your oven has possibly been interrupted, but

 

 

has now come back on again. Reset the timer to the correct time of

 

 

day and "Manual" operation using instructions given in the timer

 

 

section of the book.

 

 

 

Main & Top Ovens do not work,

 

Check the following to ensure that the timer is in Manual Mode:

but the Grill works.

 

Check that the Auto Symbol is not lit up and is not flashing.

 

 

 

 

See timer section for instructions on how to return timer to

 

 

"Manual".

 

 

 

Top Ovens and Grill do not work,

 

Operating the cooker under the following conditions may cause a

but the Main Oven works.

 

safety device to operate.

 

 

(a) Grilling with the door closed - always grill with the door open

 

 

to the correct position - see grilling.

 

 

(b) Grilling for an excessively long period at maximum setting -

 

 

see grilling guide.

 

 

(c) Grilling with inadequate ventilation in the cabinet - see

 

 

installation instructions.

 

 

 

Grill does not work.

 

Check that you have selected :- "Grill" function on the "Top Oven /

 

 

Grill Select" knob (B) and a Grill setting on the "Grill" knob (A) - see

 

 

grilling page.

 

 

 

Grill keeps turning on and off.

 

When the "Grill" control (A) is operating at less than MAX, the grill

 

 

will cycle on and off, this is normal and is not a fault.

 

 

 

Can not set an “Auto Cook”

 

Remember: "Cook Period" is the actual length of time for which, the

programme

 

timer will switch the oven(s) on as part of an "Auto Cooking"

 

 

programme.

 

 

 

Draught from beneath control

 

A gentle flow of air will be blown from beneath the control panel

panel.

 

when the appliance is used. If the appliance is still warm, this cooling

 

 

fan may run on, or restart itself after all of the controls have been

 

 

turned off.

 

 

The fan will stop once the appliance has been cooled.

 

 

This is normal and not a fault.

 

 

 

Timer buzzer/bleeper operates

 

Press the minute minder button to silence the Buzzer/Bleeper.

continually

 

 

 

 

 

If you have been through the above list and there is still a problem, contact Service

 

(see KEY CONTACTS, back page).

 

 

 

37

Page 37
Image 37
Hotpoint UE47 If something goes wrong, Problem, Check, Nothing works, Display shows 0.00 AUTO, but the Grill works, Manual