Installation

Electrical Requirements

For your own safety, we recommend that your cooker is installed by a competent person such as one who is registered with NICEIC (National Inspection Council for Electrical Installation Contracting). The cooker should be installed in accordance with the latest edition of the IEE Regulations.

Warning: This appliance must be earthed.

Electrical Connections

The installer must check that the voltage shown on the rating plate corresponds with the house electricity supply.

The cooker must be supplied via a suitable double pole isolating switch, having a contact separation of at least 3mm in all poles placed in a readily accessible position adjacent to the cooker.

If the cooker is to be wired into a connector unit, this may be positioned behind the cooker providing the following requirements are met:

i)The connector unit must not project from the wall more than 25mm.

ii)The top of the connector must not be more than 130mm above floor level.

Remove the terminal cover at the rear base of the cooker. Pass the cable through the cable clamp and connect to the appropriate terminals provided. Allow sufficient cable for any future servicing.

Tighten the screws on the cable clamp and replace the cover.

Make main connections in the connector unit or cooker control unit.

This appliance conforms to B.S. EN 55014 regarding suppression of Radio and Television reception interference.

Adouble Pole control switch having a minimum rating of 32 amps should be used to feed the cooker using a suitably rated cable.

Where a hob is fitted adjacent to or over the cooker, a 45 amp Double Pole control switch should be used to feed both units via separate suitably rated cables.

We recommend a minimum of 4mm2 PVC insulated twin and earth cable conforming to B.S. 6004 for connection of each appliance.

Where a hob is fitted above the cooker the cable connecting the hob to the cooker control unit must be of 2.5mm2 85˚C heat resistant cable to BS6141 table 15

In all cases adhere to routing details (see fig. 5).

This appliance must not be installed over any other appliance that generates heat such as a plinth heater

Note: Due to many different types of installation, a mains cable is not supplied with this product. The installer will fit the correct type and length of cable.

29

Page 29
Image 29
Hotpoint UY46 Mk2 manual Installation, All cases adhere to routing details see fig

UY46 Mk2 specifications

The Hotpoint UY46 Mk2 is a remarkable refrigerator that combines modern design with advanced technology and exceptional functionality, making it an ideal choice for any kitchen. With its sleek exterior and efficient interior layout, it stands out as a premium appliance that meets the needs of contemporary households.

One of the key features of the Hotpoint UY46 Mk2 is its spacious capacity. With a generous amount of storage space, it offers ample room for groceries and other items. The interior is designed with adjustable shelves, allowing users to customize the space according to their requirements. This flexibility caters to various sizes of food items and containers, ensuring optimal use of interior space.

The refrigeration system of the UY46 Mk2 incorporates innovative technologies that promote freshness and preservation. The No Frost technology prevents ice build-up, eliminating the need for manual defrosting and ensuring that stored food remains fresh. This feature not only saves time but also enhances energy efficiency, making it an environmentally friendly choice.

Temperature control is another standout characteristic of the Hotpoint UY46 Mk2. It features precise temperature management that can be adjusted according to specific storage needs, ensuring that perishable items maintain their quality for longer periods. Additionally, the appliance is equipped with a Multi Air Flow system, which circulates cool air evenly throughout the refrigerator, reducing temperature fluctuations and maintaining optimal conditions for food storage.

The UY46 Mk2 also emphasizes energy efficiency. Designed to meet high standards in energy consumption, it often comes with a superior energy rating, helping to lower electricity bills. This aligns with the growing consumer demand for energy-conscious appliances that contribute to sustainability.

Another notable aspect of the Hotpoint UY46 Mk2 is its user-friendly design. The appliance is equipped with an intuitive control panel that makes it easy to adjust settings and monitor performance. The LED lighting inside the refrigerator not only enhances visibility but also contributes to energy efficiency by consuming less power.

In conclusion, the Hotpoint UY46 Mk2 is a well-engineered appliance that offers a blend of style, functionality, and sustainability. From its spacious layout to its advanced cooling technologies, it is designed to meet the demands of modern living. Whether you're a home cook or a busy family, the Hotpoint UY46 Mk2 is sure to enhance your kitchen experience while keeping your food fresher for longer.