Hotpoint WD865, WD860 Independent drying programme, Misuse of the dryer may create a fire hazard

Dry programmes

PROGRAMMES AND OPTIONS

Independent drying programme...

1 Remove the wet laundry and dosing ball (if used) until the correct ‘Drying Weight Load’ is left in the drum. Close the door until it clicks shut.

2

Press the ‘ON/OFF Pause’ button. ‘On’ will illuminate in the display window.

3 Press the Drying Heat button to select high heat (if required) for Cotton. The indicator light will show selection.

4	Set the required drying time or
	Sensor dry option.

5				When all the selections have been
				made press the ‘START/CANCEL’
				button.
				The door will lock, the ‘Keyhole’
6				will glow in the display.
	A short time after the programme has finished the
	‘Keyhole’ will go out and you can open the door.
		Drying Heat
		Press Button	Display		Fabric	Maximum dry
			Window shows			weight load
		Once	High Heat		Cotton	5kg
		Twice	Low Heat		Synthetics	3kg
		Timed Dry
		Press Button	Display		Fabric	Maximum dry
			Window shows			weight load
		Once	180
		Twice	150
		Three times	120		Cotton or Synthetic
		Four times	90		dependent upon	1kg - 5kg
		Five times	60		Drying Heat
		Six times	45		selection
		Seven times	30
		Eight times	OFF
		Sensor Dry
		Press Button	Display		Fabric	Maximum dry
			Window shows			weight load
		Once			Cupboard Dry
		Twice			Hanger Dry	1kg - 5kg
		Three times			Iron Dry

WARNINGS:

●If your machine is not permanently plumbed in, turn on the cold water supply to the appliance and hook the drain hose over the sink to enable the condensing action to work.

●The dryer is intended for use only where water is used for the cleaning process.

●Be careful not to touch the drum at the top as this area gets hot during drying.

●On no account should liquid fabric conditioner be added during the drying process.

●Misuse of the dryer may create a fire hazard.

20