L e d s
The LEDS provide important information. This is what they can tell you:
Delay set:
If the Delay Start function has been enabled (see page. 11), once you have started the programme, the LED corresponding to the delay set will begin to flash:
As time passes, the remaining delay will be displayed, and the corresponding LED will flash:
Once the set delay is complete, the flashing LED will turn off and the programme set will start.
Cycle phase under way: | G B |
During the wash cycle, the LEDs gradually illumi- | |
nate on to indicate the cycle phase under way: |
|
| |
Prewash |
|
Wash |
|
Rinse |
|
Spin |
|
Note: during draining, the LED corresponding to |
|
the Spin cycle phase will be turned on. |
|
Function buttons |
|
The FUNCTION BUTTONS also act like LEDS. |
|
When a function is selected, the corresponding |
|
button is illuminated. |
|
If the function selected is incompatible with the |
|
programme set, the button will flash and the |
|
function will not be enabled. |
|
If you set a function that is incompatible with |
|
another function you selected previously, only the |
|
last one selected will be enabled. |
|
If this LED is on, the appliance door is locked to prevent it from being opened accidentally; to avoid any damages, wait for the LED to flash before you open the appliance door.
The rapid flashing of the
7
