If your wireless router supports
1.Press the WPS button on your wireless router.
2.Press and hold the Wireless button on the product control panel for two seconds. Release the button when the wireless light starts blinking.
3.Wait up to two minutes while the product establishes a network connection with the wireless router.
NOTE: If this method is not successful, try using the wireless network using USB cable method.
Connect the product to a wireless network using a USB cableIf your wireless router does not support
1.Insert the software CD into the computer CD tray.
2.Follow the
CAUTION: Do not connect the USB cable until the installation program prompts you.
3.When the installation is complete, print a configuration page to make sure that the product has a SSID name.
4.When installation is complete, disconnect the USB cable.
Remove software from Mac operating systemsYou must have administrator rights to remove the software.
1.Disconnect the product from the computer.
2.Open Applications.3.Select Hewlett Packard.4.Select HP Uninstaller.5.Select the product from the list of devices, and then click the Uninstall button.
6.After the software is uninstalled, restart the computer and empty the Trash.
Priority for print settings for MacChanges to print settings are prioritized depending on where the changes are made:
26 Chapter 4 Use the product with Mac | ENWW |