HP 10 manual Rear-facing webcamera

Rear-facing webcamera

Description	Spare part number
Rear-facing webcamera (includes bracket and cable)	739816-001

Before removing the rear-facing webcamera, follow these steps:

1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.

2.Disconnect the power from the tablet by unplugging the power cord from the tablet.

3.Disconnect all external devices from the tablet.

4.Remove the back cover (see Back cover on page 19).

5.Disconnect the battery cable from the system board (see Power button board on page 20). Remove the rear-facing webcamera:

1.Release the ZIF connector (1) to which the rear-facing webcamera cable is attached, and then disconnect the rear-facing webcamera cable from the system board.

2.Remove the Phillips PM2.0×3.0 screw (2) that secures the rear-facing webcamera bracket to the tablet.

3.Lift the left side of the bracket (3) until it releases from the tab (4), and then remove the bracket (5).

Removal and replacement procedures 27