SIM/card reader board
Description | Spare part number |
|
|
SIM/card reader board (includes cable) | |
|
|
Before removing the SIM/card reader board, follow these steps:
1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.Disconnect all external devices from the tablet.
4.Remove the back cover (see Back cover on page 19).
5.Disconnect the battery cable from the system board (see Power button board on page 20), and then remove the following components:
a.Volume button board (see Volume button board on page 22)
b.Audio board (see Audio board on page 29)
c.Battery (see Battery on page 32)
Remove the SIM/card reader board:
1.Release the ZIF connector (1) to which the SIM/card reader board cable is attached, and then disconnect the SIM/card reader board cable from the system board.
2.Detach the SIM/card reader board (2) from the display assembly. (The SIM/card reader board is attached to the display assembly with
3.Remove the two Phillips PM2.0×3.0 screws (3) that secure the SIM/card reader board to the display assembly.
36 | Chapter 4 Removal and replacement procedures |
