3.Remove the I/O board (3) and cable.
Reverse this procedure to install the I/O board.
Power button board
Description | Spare part number |
|
|
Power button board (includes micro SD Card Reader slot and SIM slot) | |
NOTE: The power button board spare part kit does not included the power button board cable. |
|
The power button board cable is included in the Cable Kit, spare part number |
|
|
|
Before removing the power button board, follow these steps:
1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.Disconnect all external devices from the tablet.
4.Remove the back cover (see Back cover on page 12).
5.Disconnect the speaker cable from the system board (see Battery on page 14).
Power button board | 17 |
